Active Member
|
[China]
Address: Dikouzhang Bozhen Botou Cangzhou City Hebei Province China
Contact name:Shirly
ZhongHeng Machine Manufacture Co.,Ltd |
|
|
PLC Frequency control roofing sheet roll forming machine with 18 mm thickness midel plate
Specification
NO. | ITEM | PARAMETER | NOTE | |
1.
| Suitable material
| Type | Pre-painted sheet, Galvanized sheet |
|
Width(mm) | 914mm |
| ||
Thickness(mm) | 0.3-0.8mm |
| ||
Yield stress(mm) | G220-G300 |
| ||
2. | Product specifications | Detail as the attached file | ||
Length | Any length |
| ||
3. | Power requirement
| Type | 380v/3ph/50hz | Motor brand shanghai Lichao |
Main Motor power | 4kw | |||
Cutter power | 4kw | |||
4. | Forming speed(m/min) | 8-10m/min | Not include the time of cutting | |
5. | Manual Decoiler
(Optional) | Type | Manual |
|
Max capacity | 5t |
| ||
Suitable coil OD(MM) | 1000 |
| ||
Suitable coil ID(MM) | 508 |
| ||
6. | Forming stand | 6 | Depend on actual design | |
7. | Thickness of structure | 18mm |
| |
8. | Forming shaft diameter(mm) | 75 solid |
| |
9. | Type of cutting | Roll formed and length-set cutting |
| |
10. | Control system | Panasonic PLC and inverter |
| |
11. | Install dimension(depend on the final design) | 4.2m×1.5m×1m | Without panel length | |
12. | Total weight (Approx) | 2.8T | Depend on final design | |
Description
This model of machine produce the roof sheet is tile sheet,It has only 6 stations of forming rollers.The cutter is different ,it is cut according to the edge of the tile shape.Its usually used for the stone coating roofing tile.
Flow chart
Uncoiling→Feeding material into machine→Roll forming→Measuring length→ Auto cutting
→Products receiving
Competitive Advantage:
1. Two cylinda control hydraulic cutter
2. Pillar leading type
3. Short length save space
4. excellent quality
5. Operate easily
