|
[China]
Trade Verify
Address: No.8, Hehua Rd., Pudong New District, Shanghai, China, 201314
Contact name:Lyla Tan
Shanghai LIVIC Filtration System Co., Ltd. |
|
Verified Suppliers
|
|
|
Self-cleaning Metal Edge Filter DFX Series for Amine Filtration
Description
Wherever highly viscous liquids or pastes are used in the production process, the metal edge filter is choice to cleanly separate unwanted particles. Its robust construction with filter elements made of triangular stainless steel wire predestines this automatic filter for use in applications with high particle concentrations and volume flows up to 900 m3/h. The particle discharge can be regulated individually. With available gap widths between 50 and 2,000 μm, the DFX metal edge filter covers a wide range of applications. In addition to the preparation and homogenization of highly viscous liquids and pastes, DFX metal edge filters have also proven their worth in the filtration of process water that is contaminated with coarse particles. Both in the variant with cast housing and in the welded version, the metal edge filter can even withstand high operating pressures.
The conventional filters get clogged frequently when filtering the viscous liquid and removing the soft impurities. The customers have to select larger filters and clean the filter manually and frequently, which means expensive investment, hard work, valuable liquid loss. DFX filter solves these kinds of problems by its advanced self-cleaning. It always keeps the filter element clean, discharges waste liquid with high impurity concentration, reduces the liquid loss. When filtering the viscous liquids such as dirty water, adhesives, resins, polymers and oil, DFX filter works more efficiently. DFX filter is taking place fo vibrating screen, bag filter, basket filter and some kind of back-flushing filter by its technical advantages and low running cost.
Applications:
Applicable Industry: oil and fats, water treatment, pulp and paper,
petro-chemical, fine chemical
Applicable Liquids: wax, kerosene, monomer, polymer, citric acid,
fermented broth, cosmetics, silicon solution, soap, sorbitol,
steriodsugar, wet end additives, adhesives, inks, lubricating oil,
coatings, resin, rubber, ethanol, miscella, diesel, etc.
Specifications:
| Applicable Liquid | water and viscous liquids(<800000cps), impurity<1000ppm |
| Filtration Rating | 50-500µm |
| Standard Design Pressure | 1.0 MPa, high design pressure available |
| Design Temperature | 0-200°C( determined by the seal material) |
| Filter Area Per Filter | 0.11m²-1.36m² |
| Cleaning Differential Pressure | 0.05MPa |
| Differential Pressure Instrument | differential pressure tansmitter(DPT) or diffential pressure switch(DPS) |
| Gear Motor | 180w, three phase, 380V, protection class IP 55; worm reduction gear |
| Inlet and Outlet Standard | flange, HG20592-2009(DIN compatible), HG20615-2009(ANSI B16.5 Compatible) |
| Filter Element Type | V-SLOT slotted metal filter element, 316L material |
| Housing Wet Part Material | 304/316L/CS |
| Scraping Blade Material | 304/316L |
| Housing Seal Material | NBR/VITION(FKM) |
| Discharging Valve | Pneumatic ball valve, protection class IP65 |
| Supply Facility Requirement | 380V AC,0.4-0.6MPa clean and dry compressed air |
