Twin Screw Oil Press Machine Low Temperature Oil Presser Easy Operation

Twin Screw Oil Presser and Low Temperature Oil Extruder and Oil Expeller​

Twin shaft screw expeller has two screw shafts ratating to each other,conveying the material forward by shearing force,which has strong pushing force and self-clean the oil outflow path,which is applicable for the low temperature(also call cold pressing) or nomal pressing of vegetable oil seed such as tea seed kernel,soybean,peanut kernel,sunflower seed kernel,perilla seed kernel,azedarach seed kernel.

Priorly applies for the production of seeds of high fiber content,middle capacity(above 50tpd),and special kinds seeds.Which can produce pure nature with no additive health oil,and the byproducts are low harmed,so as to fully utilize the byproducts.

Characteristic

1. Perfect structure, simple management, gearbox bearing imported from Germany and Japan.

2. With adjusting vessel,so the machine can adjust the temperature and water contect of the flakes.

3. Two parallel screw shafts push the flakes forward,the shearing force acts so as to solve the problem of the press of high oil content,low fiber content seed kernel.

4. With the powerful shearing force,the machine has execllent self-clean ability,is applicable for the low temperature press of various kinds of high oil content seed kernel.

5. The easily worn parts adopt high abrasion rasistance metal material so they quite durable.

Technical Data

1. Motor power: 55/75kw(high temp.)+7.5kw+80x2w

2. Net weight: 10500kg

3. Boundary dimension: 4535x2560x3055mm

4. Daily processing capacity: cold press: 40-50t/d (based on sunflower seed) ;  hot press: 80-100t/d (based on peanut kernel)

5. Dry cake residual oil: cold pressing: 12-14(based on sunflower seed)

                                      hot pressing: 15-17%(based on peanut kernel)

The Payment: 100%T/T in advance before producing

(above USD10000 : 50% deposit need to pay by T/T in advance,the balance before shipment)

Machine Commissioning: we will dispatch engineer for machine for commissioning at the final customer side.Engineer’s round trip air ticket,local transport,local accommodation is covered by customer side.

Warrantee:one year start from the day of the acceptance for running machine at final customer side.

Leadtime:10-20days