|
[China]
Trade Verify
Address: No.6-36, Yaogu Farm, Shibi No.3 Village, Shibi Street, Panyu District, Guangzhou, Guangdong, China
Contact name:Tessa Huang
HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD |
|
Verified Suppliers
|
|
|
IEC 60335 Test Finger Probe Blender Probe Nylon Handle Stainless steel Probe
Standard:
IEC 60335-2-14 ‘Household and similar electrical appliances - Safety - Part 1: General requirements’ clause 20.102.
Standard description:
Blades of hand-held blenders shall be completely screened from
above and shall not be able to touch a flat surface while rotating.
Compliance is checked by inspection and by applying a cylindrical
rod from any position between the vertical and an angle of 45° to
the upperside of the blending blade. The rod has a diameter of 8.0
mm ± 0.1 mm and unlimited length.
It shall not be possible to touch the blades with the end of the
test rod.
Application:
It is used to test whether the blade of hand-held stirrer is completely concealed from above and flat surface can be touched when the blade is rotating.
Test sample:
Handheld blender.Test Finger Probe.
Feature:
The test is achieved by applying a cylindrical rod from any position where the angle between the probe and the blade above is 45°to touch the blade. During the test, it shall not be possible to touch the blades with the end of the test rod.
Parameters:
| Model | HT-I24 Test Finger Probe |
| Probe diameter | Φ8 |
| Probe length | 80 |
| Handle | Nylon |
| Probe | Stainless steel |
