HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD |
Verified Suppliers
|
|
Auto Parts Test Equipment Environmental Test System With Temperature/Humidity/Vibration
Standard:
IEC 60068-2-1 Environmental testing for electric and electronic products – Part 2-1: Tests methods – Test A: Cold;
IEC 60068-2-2 Environmental testing for electric and electronic products – Part 2-2: Tests methods – Test B: Dry heat;
IEC 60068-2-78 Environmental testing – Part 2-78: Tests methods – Test Cab: Damp heat, steady state;
IEC 60068-2-30 Environmental testing for electric and electronic products – Part 2-30: Tests methods – Test Db: Damp heat, cycle (12h+12h cycle)
MIL-STD-810F Method 501.2, 502.2
Feature:
With respect to the test requirements in the fields of aviation, aerospace, military, automobile and communication & electronics, we can provide the chambers with standard volumes from 500L to 4,000L, and customize the chamber combined with temperature, humidity and vibration of any volume according to the customer requirements. The unique blind plate sealing technology is adopted to ensure the perfect sealing of working chamber baseplate and vibrating table during the integrated vibration test. According to the technical requirements of the customers, the functions regarding fast cooling, liquid nitrogen, humidity and dry-air blast, etc. can be equipped. Auto Parts Test Equipment
Parameter:
Inside volume | 500L(can be customize) |
Temperature range | -70°C~+150°C |
Humidity range | 20%~98% R.H. (temperature operating range +20°C~+85°C) |
Temperature fluctuation | ±0.5 Auto Parts Test Equipment |
Temperature deviation | ±2°C |
Humidity deviation | -3~+2%R.H.(over 75%R.H.), +5%R.H.(below 75%R.H.) |
Standard load(kg steel ingot) | 20 |
Heating / cooling rate | 1-15°C/min optional (full average, -55~+85°C) |
Remark | Above indicators are measured in no load at ambient temperature of 20±2°C |
Internal dimension | 800*800*800 |
Vibrostand size | Horizontal stand ≤500*500; vertical stand ≤500*500 |
Caster | 4pcs |
Inspection window | One, 450*450 |
Test hole | Two, diameter 100 |
Stainless steel shelf (2pcs in standard configuration) | Bearing 25kg/pc |
Movable floor(2 or 3 pcs) | 1 blind interface board, 1 vertical interface board, 1 horizontal interface board |
Illumination | 35W/12V |
Colling mode | Water cooling (water temperature 7~28°C, water pressure 0.2~0.4Mpa) |
Power supply | 380V±10%/50Hz±1, three phase five wire system(3P+N+G) |