30330-15000 Adept MV-8 30330-15000 Robot Controller Chassis Adept 30330-15000

30330-15000 Adept MV-8 30330-15000 Robot Controller Chassis Adept 30330-15000

Adept 30330-15000

Adept MV-8 controller

The Adept MV-8 controller is an 8-slot chassis. It requires two modules: the System Processor module (030 or 040) and the System Input/Output (SIO) module. The System Processor module takes one slot and the System Input/Output module takes two slots. The remaining five slots can be populated with various combinations of optional Adept modules; see Figure 2-2. The Adept MV-8 chassis has a user-configurable 115/230 VAC single-phase, 250-watt power supply. The chassis is cooled by a fan located in the lower front section. Incoming air is cleaned by a reusable filter.

The Adept MV controller is shipped from the factory with all the modules specified on the sales order installed in the chassis. Any unused slots are filled with blank covers. You may want to add modules in the future or remove and re-install a module for some reason. Additional modules should generally be added to the chassis from left to right, starting with the slot to the right of the last existing module. However, you can add any optional module to any unused slot, in any order you like – as long as it is a valid configuration (see section on backplane jumper plugs below). The VGB and VIS modules must be installed side-by-side

Advantages of our products:

1.Improve efficiency
2.Optimize plant operations
3.emission reduction
4.Avoid unplanned downtime
5.Provides the lowest Total Cost of Ownership (TCO)
6.provides integrated control, power, safety,
and information solutions for complete plant-wide control in a scalable,
7.open architecture to take advantage of traditional or renewable sources of energy!
8.new and original

Payment:T/T 100% in Advance

Lead Time : 3-5 Days

Minimum Order Quantity : 1 Piece

Warranty : 1 Year