|
[China]
Trade Verify
Address: 32D floor ,GuoMao building , Hubin South Road, Siming District,Xiamen City，Fujian Province，China.
Contact name:Miya
MOORE AUTOMATION LIMITED |
|
Verified Suppliers
|
|
|
Allen Bradley 1442-EC-5885A 1442EC5885A AB 1442 EC 5885A
Product Description:
The ground conductor of the motor cable should be connected to the drive ground (GRD) terminal directly. Connecting this ground conductor to a cabinet ground point or ground bus bar may cause high frequency current to circulate in the ground system of the enclosure. The motor end of this ground
conductor must be solidly connected to the motor case ground.
Shielded or armored cable may be used to guard against radiated
emissions from the motor cable. The shield or armor should be
connected to the drive ground terminal and the motor ground as
outlined in the Grounding section of this Installation
chapter. Common mode chokes are recommended at the drive output to
reduce the common mode noise. An RFI filter can be used and in most
situations provides an effective reduction of RFI emissions that
may be conducted into the main supplylines. If the installation
combines a drive with sensitive
devices or circuits,it is recommended that the lowest possible drive PWM frequency be programmed.
Contact Information:
Email :sales@mooreplc.com
Q Q: 2851195450
Skype: miyazheng520
Mobile:86-18020776792 ( what's app )
Related Product Recommendation:
|
Product's Character:
Bulletin 1305 drive parameter data can be programmed and displayed using PLC’s, SLC’s or other logic controllers using an optional Bulletin 1203 Communication Module. The amount of information that can be transferred between the drive and controller is determined by the DIP switch settings on
theCommunication Module. Table B.1 illustrates the dip switch
settings for Bulletin 1203-GD1 (Remote I/O) communication modules.
Dip switch settings for other communication modules will be
similar. Refer
to the appropriate communication module user manual for
details.Important: 1305 drives with firmware
revisions FRN1.01 and FRN1.02 are not compatible with Bulletin 1203 Communication Modules. If connected, an error message will be indicated. The red fault status and amber SCANport status LED’s on the front of the module will flash simultaneously.
1771-NIV1 Analog Input Module AB
1771-NIVR Analog Input Module AB
1771-NIVT Analog Input Module AB
1771-NOC Analog Output Module AB
1771-NOV Analog Output Module AB
1771-NOV A High Resolution Isolated Analog Module AB
1771-NR Analog Input Module AB
1771-NT1 Analog Input Module AB
1771-NT2 Analog Input Module AB
1771-OA Digital Output Module AB
1771-OAD AC Output Module AB
1771-OAN Digital Output Module AB
1771-OBD Digital Output Module AB
1771-OBN Digital Output Module AB
1771-OC Digital Output Module AB
1771-OD Digital Output Module AB
1771-OD16 Digital Output Module AB
1771-ODC Digital Output Module AB
1771-ODD Digital Output Module AB
1771-ODZ Digital Output Module AB
1771-OFE1 960578 Analog Output Module AB
1771-OFE2 Analog Output Module AB
1771-OFE3 Analog Output Module AB
1771-OG TTL Output Module AB
1771-OGD TTL Output Module AB
1771-OM Digital Output Module AB
1771-OMD AC Output Module AB
1771-ON Digital Output Module AB
1771-OP Digital Output Module AB
1771-OQ Digital Output Module AB
1771-OQ16 1771-OQ16 A Digital Output Module AB
1771-OR Digital Output Module AB
1771-OVN Digital Output Module AB
1771-OW Selectable Contact Module AB
1771-OW16 1771-0W16 B Digital Output Module AB
1771-OWN 1771-0W16 B Digital Output Module AB
1771-OWNA 1771-0W16 B Digital Output Module AB
1771-OX Output Module AB
1771-OYL Digital Output Module AB
1771-OZC Contact Output Module AB
1771-OZL Digital Output Module AB
1771-P10 Power Supply Module AB
PHOENIX CONTACT FLKM-14/PA/BUS/S100 9182136
NSK SERVO DRIVE ESA-LYA3T13-21
MITSUBISHI MELSEC PLC A1S61PN A2USCPU A1SX42 A1SY42
KUHNKE PROFI I/O 690E, 8 DI, 4 DI/DO, 4 DO, 2-WIRE, SCREW-TYPE TERMINAL 690.620.
SIEMENS SIMATIC S5-100U 6ES5 931-8MD11
SIEMENS SIMATIC S5 INTERFACE MODULE 6ES5 316-8MA12
SIEMENS SIMATIC S5 SERIAL INTERFACE 6ES5 521-8MA22
SIEMENS SIMATIC S5 6ES5 422-8MA11 DIGITAL INPUT MODULE
PANASONIC AC SERVO DRIVER MSDA3A3A1A
MERIDIAN LABORATORY ROTARY COUPLING MX-2 MX-2/AIT
SIEMENS SIMATIC S5 SERIAL INTERFACE 6ES5 521-8MA21
SIEMENS SIMATIC S5 6ES5 464-8ME11 ANALOG INPUT
SIEMENS SIMATIC S5 ANALOG INPUT 6ES5 464-8MA21
SIEMENS SIMATIC S5 6ES5 464-8MC11 ANALOG INPUT
AGL MAGNETRON POWER SUPPLY D13550 WORKING
VICOR MEGAPAC MP6-76600 DC POWER SUPPLY
ASTeX 80-P01-HP EPS Power Supply ETO Module
MKS 260 PS-1 POWER SUPPLY
Kenwood PSR20-18MY3 Regulated Power Supply
The use of the product:
1.transmission and distribution.
2.textile printing and dyeing,
3.machinery,
1.Experienced technichal support team.
2.open architecture to take advantage of traditional or renewable
sources of energy!
3.We keep more than 10 thousands Transistors in warehouse, it could
cut lead time of most items.
Our advantages:
1.open architecture to take advantage of traditional or renewable sources of energy!
2.We keep more than 10 thousands Transistors in warehouse, it could
cut lead time of most item
3.Customer service in 1-4 hours. If there's any question, please
contact with our sales.
Frequently Asked Questions:
1. Q: Can you provide discount ?
A: Yes, we are glad to offer you dicount if you order more than 1
piece .
2.Q: Are the P/N latest?
A: Yes. All P/N are latest and date codes are in 2016 or 2017.
3.Q: What is the capacity of your warehouse?
A: We have 1-2Mil USD safe stocks and 3 warehouses, which located
Xiamen, Shenzhen & Hongkong.
Send your Inquiry details in the Below, Click "Send" Now!
