ABB PLC Module Drive DSTA160 DSTA 160 DSTA-160 Keyboard Termination High Reliability

ABB Module DSTA160 ABB DSTA 160 ABB DSTA-160 KEYBOARD TERMINATION High reliability

Product Description:

Differential inputs are very useful, if analog sensors are used which are remotely non-isolated (e.g. the minus terminal is remotely earthed). Since the earthing potential is not exactly the same as
AGND1, it has to be measured bipolar in order to compensate measuring errors. Additionally, in case of singlepole configuration, AGND1 would be connected directly to the remote earth potential. This would cause inadmissable (and possibly dangerous) earthing loops. In all configurations using differential inputs two adjacent analog inputs belong together (e.g. EW 6,00 and EW 6,01). For configuration, both inputs must be configured for the desired operating mode, see configuration table Fig. The measured value is calculated by subtraction. The value of the channel with the lower address is subtracted

Related Product Recommendation:

Product's Character:

From the value of the channel with the higher address. The converted measured value is available on the odd address (e.g. EW 6,01). Important: The common mode input voltage range equals the measuring
range of the single channel. I.e. that the signals, related to AGND, at the two involved inputs must not exceed this measuring range. Input voltages that exceed the measuring range cause
the overflow numerical value of +32767. If the measured value is below the range, the underflow numerical value of -32767 is set. In all configurations using differential inputs two adjacent analog inputs belong together (e.g. EW 6,00 and EW 6,01). For configuration, both inputs must be configured for the desired operating mode, see configuration table Fig. The measured value is calculated by subtraction. The value of the channel with the lower address is subtracted

DC 371a GJR2 237100 R1, GJR2237100R0001 DC 371a Group Control Module ABB
DC 372a GRJ2 238200R1 , GRJ2238200R0001 Step Control Module ABB
DC 375a GJR2 304400 R1, GJR2304400R0001 DC375a Operating Mode Controller Module ABB
DC 722F A0 3BDH000372R0001 Digital Input/Output Module ABB
DCO 01 0369666 DCO01 Serial Interface Module ABB
DCP 02 P 37211-4-0369654 DCP 02 CPU Module ABB
DCP 10 P37211-4-0338701 DCP10 CPU Module ABB
DCS800-DEMOCASE Field Kit ABB
DCS800-EP1-0020-05 Module Drive ABB
DCS800-EP1-0045-05 Module Drive ABB
DCS800-EP1-0065-05 Module Drive ABB
DCS800-EP1-0090-05 Module Drive ABB
DCS800-EP1-0125-05 Module Drive ABB
DCS800-EP1-0180-05 Module Drive ABB
DCS800-EP1-0230-05 Module Drive ABB
DCS800-EP1-0315-05 Module Drive ABB
DCS800-EP1-0405-05 Module Drive ABB
DCS800-EP1-0470-05 Module Drive ABB
DCS800-EP1-0610-05 Module Drive ABB
DCS800-EP2-0020-05 Module Drive ABB
DCS800-EP2-0045-05 Module Drive ABB
DCS800-EP2-0065-05 DCS800-EP2-0065-05 ABB
DCS800-EP2-0090-05 Module Drive ABB
DCS800-EP2-0125-05 Module Drive ABB

DCS800-EP2-0180-05 Module Drive ABB
DCS800-EP2-0230-05 Module Drive ABB
DCS800-EP2-0315-05 Module Drive ABB
DCS800-EP2-0405-05 Module Drive ABB
DCS800-EP2-0470-05 Module Drive ABB
DCS800-EP2-0610-05 Module Drive ABB
DCS800-PAN Field Kit ABB
DCS800-S01-0020-05 Module Drive ABB
DCS800-S01-0045-05 Module Drive ABB

The use of the product: