|
[China]
Trade Verify
Address: 32D floor ,GuoMao building , Hubin South Road, Siming District,Xiamen City，Fujian Province，China.
Contact name:Miya
MOORE AUTOMATION LIMITED |
|
Verified Suppliers
|
|
|
Allen Bradley Modules 1768-L43S 1768L43S AB 1768 L43S COMPACTLOGIX L43 SAFETY PROCESSOR For new products
Product Description:
The Remote I/O communications module allows a SCANport product to
look and act like a Remote I/O chassis when connected to a
programmable controller. Data contained in the input/output image
table is transferred between the programmable controller by the
Remote I/O scanner, the same as with any Remote I/O chassis. You
control the location of data transferred by setting the rack
address and
starting group. You control the amount of data by setting the DIP
switches on SW3. Important: Thecommunications module does not scale
the data that is transferred. Consequently, all scaling of the data
must be done in the controller. Refer to the user manual for your
SCANport product for details on
device units. Important: The Remote I/O to SCANport conversion is
asynchronous. Data sent to the adapter for transfer to the drive
must be maintained until the drive has received data.DIP switches
on SW3 determine how the data contained in the programmable
controller I/O image table is used in the drive. Figure shows an
I/O image table.
Related Product Recommendation:
|
Product's Character:
For the requested packet interval, enter the number of milliseconds
desired between each I/O message
between the ControlLogix processor and the 1203-CN1. The 1203-CN1
can handle a packet interval as
low as 5 milliseconds; therefore, make sure that this value is set
to at least Click the "Finish" button to
complete the configuration of the I/O connection in RSLogix 5000.
At this point, download your configuration to the ControlLogix
processor, then exit RSLogix 5000. To actually schedule the I/O,
you will need to start RSNetWorx for ControlNet. Once RSNetWorx
starts, go online to the ControlNet network
containing the ControlLogix chassis and 1203-CN1 being configured.
Turn on the "Enable Edits" check box, then save the network. This
causes the I/O connection created in RSLogix 5000 to be scheduled
in the ControlLogix processor. After a few seconds, the I/O LED on
the ControlLogix processor and the module LED on the 1203-CN1
should stop blinking and remain green. If they do not, it could
indicate a number of I/O-related problems
1756-L55M14/A 1756-L55/A, 1756-M14/A Logix5555 Processor, 3.5 MB
memory, Series A AB
1756-L55M16/A 1756-L55/A, 1756-M14/A Logix5555 Processor, 7.5 MB
memory, Series A AB
1756-L61/A Logix5561 Logix5561 Processor - 2MB AB
1756-L61/B Logix5561 Logix5561 Processor - 2MB AB
1756-L62/A Logix5562 Logix5562 Processor - 4MB Memory AB
1756-L62/B Logix5562 Logix5562 Processor - 4MB Memory AB
1756-OB16E/A Digital Fused Output Module - Series A AB
1756-PA72/A 1756-PA72 Power Supply - Series A AB
1756-PA72/B 1756-PA72 Power Supply - Series B AB
1756-PA72/C 1756-PA72 Power Supply - Series A AB
1761-CBL-PM02 Program Storage Device Cable AB
1761-L32BBB MicroLogix 1000 Unit AB
1762-IQ16 16PT 24VDC Power Supply Module AB
1762-MM1 MicroLogix Memory Module AB
1762-MM1RTC MicroLogix Memory and Real-Time Clock Module AB
1762-OF4 Analog Output Module AB
1762-OW16 16PT VAC/VDC Relay Output AB
1762-RTC MicroLogix Real-Time Clock Module AB
1764-24BWA MicroLogix 1500 Base Unit AB
1764-LRP Processor AB
1764-LSP Processor Module AB
1766-L32BWA Micro Logic Relay Output AC Power AB
1769-ECR Right End Cap AB
1769-IF4 Analog Input Module AB
1769-IQ16 Digital Input Module AB
The use of the product:
1.auto ancillary.
2.electricity,
3 water, water treatment / environmental protection,
1. Avoid unplanned downtime
2. new and original
3.1 year warranty
Our advantages:
1. We keep more than 10 thousands Transistors in warehouse, it could cut lead time of most items.
2.2000+ suppliers with us, we could help you to get any components
which is difficult to get.
3.Risk-free guarantee, 60 days refund. If the item you purchase
from our store are not of perfected quality, simply return them to
us for replacement or refund.
1.Q: Does Moore keeps goods in stock or only trading?
A: We have large warehouse for goods. Keep lots of goods in
warehouse, so could promise fast delivery.
2.Q: Do you provide warranty for the goods?
A: Yes, we provide warranty for all the goods from us.
3.Q: Are the P/N latest?
A: Yes. All P/N are latest and date codes are in 2016 or 2017.
Send your Inquiry details in the Below, Click "Send" Now!
Email :sales@mooreplc.com
Q Q: 2851195450
Skype: miyazheng520
Mobile:86-18020776792 ( what's app )
