Single Punch Tablet Compression Machine DP Series Pharmacy

3600 Tablets Per Hour DP Series Single Punch Tablet Press Machine

3600 Tablets Per Hour DP Series Single Punch Tablet Press Machine Quick Details:

- GMP model single punch tableting machine

- with stainless steel cover and plexiglass cover

- frequency converter control

- working stable and easy operation

- support multi-tips punch&die

3600 Tablets Per Hour DP Series Single Punch Tablet Press Machine Output Products introduction:

DP-25 single punch tablet machine was developed with the advanced technology introduced from abroad. It is used for medicine, chemical, electronics, food and lab etc, pressing powder or grain into tablets continuously.

Its advantages are: high material utilization ratio,reasonable structure, convenient handling, small dimension, high pressure, low noise, small tablet weight difference, adjustable filling depth and tablet thickness, each function of the machine meets the level of imported machine and requirements of state medical sanitation,it is widely used in scientific research institution ,medicine factory lap and hospital pharmaceutical lab.

This machine adopts many new technologies which ensure the safety and standardization during the production.

• Highly sealed structure ensures powder cross pollution, meeting GMP.
• Safe protection device and humanization design
• Four-pillar structure provides larger operation space
• Outstanding bearing ability is applicable for wider using fields
• Integral transmission structure maintains stable and low-noise operation.

3600 Tablets Per Hour DP Series Single Punch Tablet Press Machine Working principle

The machine presses tablets by the reciprocating movement of lower and upper punch. The lowest position of the lower punch, as well as the filling amount, can be set by adjusting the filling wheel, as well as the filling amount. The upper punch position, as well as the thickness and hardness of the tablets, can be set by adjusting the gear shaft.

The main motor revolves the main shaft and eccentric cam through turbo retarder; and the eccentric cam drives the upper punch reciprocating movement; the main shaft drives the double cams rotating, which drives the feeding mechanism, tablets output structure and lower punch reciprocating movement through the connecting rod. The upper punch, lower punch, feeding mechanism and tablets output structure moves harmoniously to realize the process of feeding, pressing and tablets outputting.

The process of tables forming: material is feed into the centre die by the feeding mechanism when the lower punch is in the lowest position. When the feeding mechanism moves away, the upper punch moves downwards, pressing the material in the centre die cavity into form; when the upper punch moves to the deepest position, it moves upwards continuously, then the lower punch moves upwards subsequently. When the upper punch moves out of the centre die cavity, the lower punch pushes the formed tablets out of the centre die cavity; the tablets will be pushed out by the feeding bottom fringe through the movement of feeding mechanism; at the same time, the lower punch reaches the lowest position, ready for the next cycle.

Technical parameter:

Keywords:

laboratory tablet press machine, single punch tablet making machine, single punch tableting machine