Active Member
|
[China]
Address: 8# Shidonghe Road, Zhoushi Town, Kunshan, China
Contact name:Lucky
Kunshan Daxinhua Laser Technology Co.,Ltd |
|
|
Fully Enclosed Fiber Laser Cutting Machinery Laser Power 500W to 6000W PC Control System Safety Operation
Technical Parameters
Equipment Models | DXHFC3015 |
Laser Output Power | 500W-6000W |
Laser Wavelength | 1068~1080nm |
Laser Quality | 3.5~4mm*mrad |
Minimum Line Width | ≦0.15mm |
Cooling Mode | Water Cooling |
Maximum Cutting Range | 3000mm×1500 mm |
Travel of X-axis | 3000mm |
Travel of Y-axis | 1500mm |
Travel of Z-axis | > 250mm |
Axial Positioning Accuracy of Workbench | 0.05mm/m |
Repetitive Positioning Accuracy of Workbench | ≦±0.03mm |
Cutting Processing Parameters of DXHFC4020 4000W Laser Cutting Machine
| Material | Maximum Cutting Thickness/mm | Best Cutting Thickness Range/mm |
| Carbon Steel | 25 | 0.5-20 |
| Stainless Steel | 12 | 0.5-10 |
NOTES:
1.Environment requirements of fiber laser source: temperature is about 15 to 35 degree, relative humidity is less than 85 percent.
2. Power distribution cabinet: 380V, 50Hz, three-phase and four wire with short circuit protection.
3. Equipment shall be installed with special grounding wire, the grounding resistance should not exceed 4Ω.
4.Necessary lifting equipment and personnel are provided.
5. Provide the necessary testing materials such as steel plate.
6. Auxiliary conditions for the normal operation of laser cutting equipment:
1) cutting auxiliary gas (N2, O2);
2) compressed air supply system without water and oil.
7. Equipment space and foundation requirements: the foundation is the concrete, the minimum thickness is 300 mm; no earthquake around the foundation or shock absorber.
For more machine information, Please contact with Lucky at any time.
All our staffs sincerely invite you and your team visit our company at any time.
