Zhangjiagang Jinyate Machinery Co., Ltd |
General description
3-in-1 glass bottle juice packing machine with rinsing, filling and
capping. It is innovated and designed in the requirement of
non-carbonated energy drinks, juice, tea, on the bases of
introducing, digesting and absorbing advanced technology from
Germany and Italy.
Main features
1. Bottle infeed
1) Bottle infeed by combination of infeed starwheels.
2) Equipped with bottle jam protection device.
2. Rinser
1) Spring cramps are used in the bottle washing process. The empty
bottles can be turned over 180° along the conveying rail. There are
two times of internal and external washing, the efficiency of
bottle washing is high.
Rinsing machine adopts Sunswell original overturn and double-opened
bottle clip. Bottle clip lock the bottleneck, the material of
bottle clip is SUS304, which is hygienic and durable.
2) Bottle clip equipped with efficient spray on nozzle. The
extrusive droplet with 15° angle ensures to wash all side of the
bottle, and can save the water.
3. Transfer starwheel
1) Made of stainless steel of superior quality.
2) Equipped with bottle jam protection device.
3) Our automatic juice packing machine model : Juice and tea
beverage processing machinery and production line Automatic juice
and tea beverage filling machine and production line Juice and tea
beverage filling machinery and production line Automatic aseptic
juice filling machine and production line Automatic tea drinks
filling line/machine/equipment
4. Filler
1) It is reasonable and hygiene dead angle, the run of equipment is
stable, it can control the material from the bottleneck, the
control accuracy is within ±2mm.
2) The filling valve material is SUS304
3) The filling system has liquid level automatic control.
4) Filling valve lift is controlled by the valve elevator, after
filling valve contact the bottleneck ,it start to fill.
5) Bottle is conveying by the wheel in the filling part.
6) The juice or other hot beverage can be backflow by return tank
to control filling temperature.
5. Capper
Screw capping machine is most precision part in the 3-1 machine, it
has a big influence to the goods stability and defective rate. our
screw capping has following feature.
1) Jiayuan import of advanced technology of screw capping, improve
the stability and reliability of the screw capping machine. The
magnetic torque is used for screw capping. the power of screw
capping can be adjusted without steps. The power of the screw
capping can also be fixed, and the caps will not be damaged, the
capping is reliable.
2) In the screw capping part. it installed photoelectrical control
, when it has no cap ,or the cap is bad, the machine will stop
automatically.
Technique parameter
Model | RCGF8-8-3 |
Rinsing Head | 8 |
Filling Head | 8 |
Capping Head | 3 |
Bottle Volume | 350ml~2000ml±10ml |
Bottle Diameter | φ50-92mm |
Bottle Height | 150-310 mm |
Filling Tolerance | ±2% |
Cap Size | 28mm and 30mm PE Standard Caps |
Air Pressure | 0.6MPa |
Air Consumption | 500 L/min |
Gas Consumption | 0.4 m3/min |
Motor Power | 9.18kW |
Voltage | 380V |