Permanent Magnet Excavator Attachments Wholesale For Metal And
Scrap YAKAI
![](http://img.everychina.com/nimg/e7/32/3cac37186c0dd8f9d3f674c6d3f3.jpg)
Hydraulic Magnet Technical Parameter
Model | Unit | CT-HM700 | CT-HM1000 | CT-HM1200A (without Teeth) | CT-HM1200B (with Teeth) | CT-HM1500 |
Outer Diameter | mm | Ø700 | Ø1000 | Ø1200 | Ø1200 | Ø1500 |
Machine Weight | kg | 1400 | 1600 | 1800 | 1860 | 2200 |
Suitable Excavator | ton | 6--9 | 10--15 | 16--25 | 16--25 | 26--35 |
Generator Power | KW | 0.6 | 10 | 10 | 15 | 15 |
Working Flow | Ipm | 50-100 | 90-110 | 100-140 | 100-140 | 130-170 |
Working Pressure | bar | 180 | 190 | 200 | 200 | 210 |
Lifting Ability | Slab Sheet | ≤ 1 ton | 1 - 2 ton | 3 - 4 ton | 3 - 4 ton | 4 - 6 ton |
Other Type Scraps | ≤ 100 kg | 100 - 200 kg | 150 - 250 kg | 150 - 250 kg | 175 - 275 kg |
* The Parameter above may change with the technology improvement,
will not notice additionally, please understand.
* Lifting Ability Influenced by the Permeability of Scrap, the Data
Range Would be Various Due to Different Working Condition
YAKAI Excavator Hydraulic Magnet Introduction
The magnet external power supply through the control cabinet of
rectifier processing to power a magnetic chuck, in the condition of
electricity, produced a powerful electromagnetic suction,
convenient to attract iron, steel, scrap, and other iron products.
Magnet is composed of built-in electric generation, oil hosing, and
outer body.
![](http://img.everychina.com/nimg/77/7e/c4a8916b76460db4543b5912c4ea.jpg)
YAKAI Hydraulic Magnet Features
- Option with tooth or without a tooth, the following is an excavator
magnet with teeth. It would help clean the concrete rock to find
the steel scrap and other iron, and steel objects.
- Rhino horn design is easy to install and use.
- Strong adsorption, lifting, and releasing speed fast.
- High production efficiency, Lightweight, and long service life.
- Special magnetic circuit design, aluminum coil, protection plate
with good wear resistance, and the impact resistance of high steel
plate.
- Semi-permanent design reduces maintenance costs.
- Only Require 24-volt Excavator Battery, no need to install extra
cable
![](http://img.everychina.com/nimg/77/7e/c4a8916b76460db4543b5912c4ea.jpg)
Scrap Magnet Application
- Lifting electromagnetic mainly used in metallurgy, mining,
machinery, transportation
- Other industries transport iron and steel, and other magnetic
materials.
- Also used as an electromagnetic manipulator, clamping steel, and
other magnetic materials
- Suitable for handling cast iron ingot, steel balls, and scrap
steel.
![](http://img.everychina.com/nimg/b1/26/256a6e6ba8bbcbeb597c5f9e5907.jpg)
Tips you need to know before installing hydraulic magnet on your
excavator
- First, confirm whether the components of the excavator suction cup
are complete and clean before the installation process.
- Second, there are hoisting screw holes on both sides of the suction
cup of the excavator.
- Third, During installation, only T-shaped screws need to be screwed
in to complete the hoisting, and then the T-shaped blocks and
screws are used to fix it on the workbench, and then connect the
mechanical equipment.
- DC power supply and ground wire, and then finely grind the upper
plane of the suction cup of the excavator once so that the
parallelism of the upper plane and the bottom surface can be kept
consistent, and there will be no gap between the two planes during
the specific construction process.
- affecting work efficiency. When completing the above installation
progress, it is necessary to carry out commissioning first, which
is to overlap the two adjacent magnetic poles to obtain sufficient
positioning suction, and then operate the construction normally. If
there are no problems with the whole process, then press the
controller button to easily power up and demagnetize.
- But if there is any problem in the process, you need to turn off
the power immediately, stop for inspection and maintenance, check
the problem in time, and then do this until the problem is solved.
- Do not continue to operate when there is a problem, it is easy to
damage the excavator and hydraulic magnet.