Shenzhen Atnj Communication Technology Co., Ltd. |
Verified Suppliers
|
|
2G 3G 4G Tri band Repeater 850/1800/2100MHz cellular signal repeater amplifier
The Repeater provides an affordable solution to solve
the indoor signal coverage problems due to signal fading and
attenuation caused by architecture obstacles. And its easy
installation and maintenance can help carrier get fast return.
The repeater is working as a relay between the BTS and
mobiles. It picks up the strongest signal from BTS via the Donor
Antenna, linearly amplifies the signal and then retransmits it via
the Indoor Signal Distribution System to the weak/blind coverage
area. And the mobile signal is also amplified and retransmitted to
the BTS via the opposite direction.
Specification:
Frequency | Uplink | Downlink | |||
CDMA 850MHz | 824-849MHz | 869-894MHz | |||
DCS 2G/4G 1800MHz | 1710-1785MHz | 1805-1880MHz | |||
WCDMA 2100MHz | 1920-1980MHz | 2110-2170MHz | |||
Max. Gain | 68dB±2dB | 68dB±2dB | |||
Max. Output Power | 17dB±2dB | 17dB±2dB | |||
Bandwidth | 25MHz&75MHz&60MHz | ||||
Ripple in Band | ≤ 8dB | ||||
Noise Figure | ≤ 6dB | ||||
VSWR | ≤ 2.0 | ||||
Spurious Emission | 9KHz~1GHz | ≤ -36dBm | |||
1~12.75GHz | ≤ -30dBm | ||||
Time Delay | ≤ 1.5 μs | ||||
MTBF | > 50000 hours | ||||
Impedance | 50 ohm | ||||
Power Supply | AC 90-240V,DC 5V/6A | ||||
Power LCD | Power indicator | ||||
Alarm LCD | Guide | Done | |||
Detection | Done | ||||
Mechanical Specification | |||||
RF Connector | N-F | ||||
Cooling | Heatsink Convection cooling | ||||
Humidity | < 90% | ||||
Operating Temperature | -10°C ~ +55°C | ||||
Environment Conditions | IP40 | ||||
Installation Type | Wall Or Desk Installation | ||||
Size | 323x269x58mm | ||||
Gross Weight | 2.5kg |
Further detail pls click here for downloading the products specification:
850+1800+2100 A009 Repeater.docx.pdf