500M Innosilicon A10 Pro 6gb miner 720W Used Ethereum Mining Rig

Innosilicon A10 pro 6gb 500M 720W Used ETH Mining

Unboxing Check:

1. Check whether the warranty sticker of the mining machine is damaged (the warranty sticker on the power interface of the power plate shall prevail). If there is any damage, please contact after-sales service in time.

2. Before assembling the mining machine, pick up the mining machine and shake it slightly. If there is a collision sound between metals, please contact after-sales service immediately.

3. Check that the two fans of the mining machine can work normally. If the fans are damaged or cannot work normally, please contact after-sales service in time.

4. The wiring mode of the machine cannot be changed.

Note:

there is an indicator light on each force plate of the machine. When the machine starts running, the indicator light,Steady on -- power plate is working properly  Blinking -- Calculate the overtemperature of the force plate. Please check the operating status of the fan, the ambient temperature and the ventilation condition.

Off: The power board is not running. Restart the machine or replace the data cable to try to locate the problem. If the problem cannot be solved, contact after-sales service.

Assembly & Boot up:

Insert the two ends of the network cable into the router and the network cable interface of the control board as shown in the picture below, power on the power supply, turn on the power switch and the machine can start running.

Note: A10 has high power consumption in some modes, please select appropriate sockets for power supply. Do not place the power cord in the air outlet to avoid damage.

Normal: There are two states: steady on and blinking. Steady on: static IP address, blinking: dynamic IP address (DHCP).
Fault indicator: It has two states: on and off. On: The network is faulty; off: The network is normal.

IPset button:

1.Press the IPset key for 1-4 seconds, you can (1) send machine IP to "SetIP" tool; (2) With the "SetIP" tool, set the mining machine to a static IP address within the range specified by the tool.

2.Hold down the IPset key for 4-15 seconds, the static IP will change to the dynamic IP, and the mine pool Settings will be restored to the default Settings.

3.Long press the IPset key 15s-30s can realize IP type reversal: static change dynamic, dynamic change static, will not delete the configuration file.

Reset button: Press the Reset button to restart the machine.
Fault red light: You can use the batch management tool to turn on and off for easy locating.
Normal Green: there are two states: steady on and blinking. Steady on: static IP address, blinking: dynamic IP address

Notice:

Please make sure your farm use proper cooling, dust filter and 10A AC cable to meet the proper operating condition requirements. Humidity <75%, AC voltage 210~240V, Power supply AC input current 10A, dust <0.5 Mg/m3.

 The PSU is not included in the price. If you need the PSU, please contact me.Thanks!

pecification

Packaging & Shipping

1. Packaging Details: Carton Packing; One Machine Per Carton

2. Delivery Details: UPS, DHL, FedEx, EMS, TNT

3. Port: Shenzhen

4. Lead Time: in 3 days after payment

5. If your shipment is not received within 30 days after payment, please contact us. We will track the shipment and get back to you as soon as possible.

6. The images shown above are not the actual item and are for your reference only.