Active Member
|
[China]
Address: 7F，Building 1, Jinchang International Garden, NO. 68, Fochen Road, Chencun Town, Shunde District, Foshan, Guangdong, China
Contact name:Asia Metal
Asia Metal Service Company Limited |
|
|
AISI SS304 stainless steel plate prices per square meter for decoration
What is 304 Stainless Steel ?
304 is the most versatile and widely used of all stainless steels. Its chemical composition, mechanical properties, weldability and
corrosion/oxidation resistance provide the best all-round
performance stainless steel at relatively low cost. It also has excellent low-temperature properties and responds well
to hardening by cold working. If the potential for intergranular corrosion in the heat-affected
zone exists, 304L is recommended.
| Surface Finish | Definition | Application | |
| 2B | Finished by heat treatment , picking or equipvalent cold rolling , followed by skin pass to obtain adequate luster surface. | With bright and smooth surface ,easy for further grinding to obtain brighter surface ,suitable for medical instruments ,milk containers ,tableware and so on. | |
| BA | Bright heat treatment after cold rolling. | Structual members .etc.kitchen utensil ,cutlery ,eleltric applicances ,medical instruments ,building decorations ,etc. | |
| NO.3/NO.4 | Polished with No.150-240 abrasives. | Milky food processing equipment , medicalinstruments ,building decorations. | |
| HL | Finshed by polishing with abrasives of suitable grain size to obtain continuous streaks. | Building decorations ,such as elevators ,escalators ,door etc. | |
| 6K/8K | A mirror-like reflective surface ,which is obtained by polishing with successively finer abrasives and buffing extensively with all gritlines are removed. | Buliding entrances,bulkding column casting ,elevator's wall doors ,counters,sculptures etc. | |
| Stainless Steel Sheet Information | |||||||||||
| Technique | Surface Finish | Grade Series | Thickness(mm) | Width(mm) | Application | ||||||
| Main Dimension | |||||||||||
| 20-850 | 1000 | 1219 | 1240 | 1250 | 1500 | Petro-chemical industry,Tanks Construction material | |||||
| Hot Rolled | No.1 / 2E | 201/202/ 304 | 2.2-12.0 | √ | √ | √ | √ | √ | |||
| Cold Rolled | 2B | 201/304 | 0.25-3.0 | √ | √ | √ | √ | √ | √ | ||
| 410S/430 | 0.25-2.0 | √ | √ | √ | √ | ||||||
| No.4 / Hairline Mirror / Linen SB | 201/304 | 0.22-3.0 | √ | √ | √ | √ | √ | ||||
| 410S/430 | 0.25-2.0 | √ | √ | √ | √ | √ | |||||
| BA | 201/304 | 0.2--1.8 | √ | √ | √ | √ | |||||
| 410S/430 | 0.25-2.0 | √ | √ | √ | √ | ||||||
| 2BA | √ | √ | √ | √ | |||||||
| Chemical composition and mechanical properties of stainless steel coils | |||||||||
| Grade | Chemical Composition (%) | Mechanieal Performece | |||||||
| C | Si | Mn | P | S | Ni | Cr | Mo | Hardness | |
| 201 | ≤0.15 | ≤1.00 | 5.5/7.5 | ≤0.060 | ≤0.030 | 3.5/5.5 | 16.0/18.0 | - | HB≤241,HRB≤100, HV≤240 |
| 304 | ≤0.08 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.03 | 8.0/11.0 | 18.00/20.00 | - | HB≤187,HRB≤90,HV≤200 |
| 316 | ≤0.08 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.03 | 10.00/14.00 | 16.0/18.0 | 2.00/3.00 | HB≤187, HRB≤90 HV≤200 |
| 316L | ≤0.03 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.03 | 10.00/14.00 | 16.0/18.0 | 2.00/3.00 | HB≤187, HRB≤90 HV≤200 |
| 410 | ≤0.15 | ≤1.00 | ≤1.25 | ≤0.060 | ≤0.030 | ≤0.060 | 11.5/13.5 | - | HB≤183, HRB≤88 HV≤200 |
| 430 | ≤0.12 | ≤1.00 | ≤1.25 | ≤0.040 | ≤0.03 | - | 16.00/18.00 | - | HB≤183, HRB≤88 HV≤200 |
304 Stainless Steel plate Display
Testing details:
Stainless steel plates are immediately sent to various testing
process after manufacturing. Testing ensures product quality in terms of best service and
quality production. The main purpose of performing tests is to analyze mechanical,
technical, and chemical properties of the product. Tests such as flattering test, flaring test, hardness test, bending
test, etc are done to test technical properties whereas Mechanical
properties such as yield strength, elongation, and tensile strength
are tested as well as Third party inspection, intergranular
corrosion test and positive material identification test is also
performed. These entire tests are performed according to the industrial norms.
Packing details
Protective Film
1. Double layer or single layer.
2. Black and white PE film/Laser (POLI) film.
Packing Details
1. Wrap with waterproof paper.
2. Cardboard encase all packs of the sheet.
3. The strap aligned with edge protection.
Packing Case
Strong wooden case, metal pallet and customized pallet are acceptable.
