|
[China]
Trade Verify
Address: 14-5,East Kemao Center, No.100 Xiangyun Road, Hi-tech district,Ningbo, China ,315040
Contact name:Herbert
NINGBO NIDE MECHANICAL EQUIPMENT CO.,LTD |
|
Verified Suppliers
|
|
|
Full Automatic Generator motor stator coil winding and inserting machine
1. The main Features and Functions
The full automatic generator motor stator coil winding and inserting machine is a four-station automatic coil winding and coil inserting machine,integrates the stator winding and embedding process, and the whole process is highly automated.
The stator coil winding and insertion machine is mature in manufacturing process, advanced in technology, reliable in quality, and convenient to use and maintain.
Designed as three winding stations and one coil inserting station, which collects A-phase winding, phase-to-phase insulation ferrule, groove-making, B-phase winding, phase-to-phase insulation ferrule, C Phase winding wire weaving, phase-to-phase insulation ferrule on one machine.
The coil winding and inserting station is controlled by the dual-power servo motor, and the parameters such as winding, pushing the line, pushing the height of the paper, and changing the product stack thickness can be set on the touch screen.
During winding, the coil will be auto wound to the tooling, so as to avoid the wire damage and snap caused by wire cross and disorder during manual wire transfer.
With six stations wokring at the same time, the stator coil winding and inserting machine will be save labor cost, high efficiency, and can fulfill the 2-pole, 4-pole and 6-pole three-phase motor coil winding.
The coil winding and inserting machine uses the German Beckhoff CNC system as the control center; the Huichuan servo motor is the actuator; the Autonics sensor is the signal acquisition component.
The data display and input adopt a touch monitor.
2. Technical parameters
| Product name : | Fully automatic generator motor stator coil making and insertion machine |
| Stator OD : | ≤φ150mm |
| Stator ID : | 40-80mm |
| Stack Height : | 30-80mm |
| Appropriate Wire : | φ0.2-φ1.2mm |
| Winding stations : | 3 |
| Coil inserting stations : | 1 |
| Height of Coil : | 2 |
| Winding inserting mode : | chained /same core |
| Voltage : | 380V 50/60Hz |
| Power : | 15Kw |
| Dimension : | (L)4050×(W)3000×(H)2500mm |
| Weight : | 4500Kg |
3. Application
This motor stator coil winding and inserting machine is suitable for miniature induction motors , air conditioner motors, washing machine motors, compressor motors, fan motors, generator motors, and pump motors, etc.
4. Picture show
5.The stator coil winder and insertion machine video
