|
[China]
Trade Verify
Address: 14-5,East Kemao Center, No.100 Xiangyun Road, Hi-tech district,Ningbo, China ,315040
Contact name:Herbert
NINGBO NIDE MECHANICAL EQUIPMENT CO.,LTD |
|
Verified Suppliers
|
|
|
Armature commutator hotstaking machine used for motor armature
rotor commutator hot stacking
Hotstaking Machine Features:
1. The commutator spot welding machine is used for motor armature
rotor commutator hot stacking
2. The commutator hot staking machine is suitable for three shifts
continuous production
3. Production efficiency:shift output is about 1500
4. Spot welding machine Loading method: manually loading/unloading
5. Dynamic display the parameter, including the shift output,
accumulate output, cycle time,etc., if there is abnormal during
production, the HMI will alarm
6. It has production(jog and auto) and commissioning mode
7. The parameter can be saved as per the armature model No.,
call-out the welding parameter through the Miyachi power source
8. It has welding limit function to remind operator to change the
tungsten rod in time
Commutator hotstaking Process:
1. Manually place the armature on the V block, positioning,
2. start the machine,
3. machine clamp the armature,
4. positioning cylinder withdraw,
5. servo motor executes indexing compensation angle,
6. automatically indexing, automatically welding, automatically
detecting the welding pressure and do the related treatment,
7. manually take the welded armature away from the V block
Main introduction and parameters:
| Product name | Armature commutator hotstaking machine |
| Loading method: (choose any one from the following three methods) | 1.Manually loading/unloading |
| Indexing method: | servo indexing |
| Commutator type: | hook or riser |
| Wire diameter: | φ0.2mm-φ1.0mm |
| Armature diameter: | φ20mm-φ60mm |
| Stack length: | 10mm-60mm |
| Shaft length: | 50mm-250mm |
| Commutator diameter: | φ10mm-φ40mm |
| Shaft diameter: | φ3mm-φ17mm |
| Commutator hook/riser number: | ≥3 |
| Zero finding method: | manually place armature, cylinder drive one block for positioning |
| Pressure control method: | spring + cylinder + pressure detection |
| Welding head cooling method: | water cooling |
| Parameter setting: | set on the touch screen and power source , Parameter also can be set |
| Power source control method: | close loop feedback, high accuracy , inversion |
| Compressed air pressure: | 4kg/cm2-6kg/cm2 |
| Welding source power: | three phase AC380V±10% 50HZ 40KW |
| Water cooler power: | three phase AC380V±10% 50HZ |
| Machine weight: | 800kg(for reference) |
| Dimension: | 785(L)x 910(W)x 2100(H)mm 3 (for reference) |
Other requirement:
Machine height: 2100mm height from the ground, the gap between
machine bottom and ground is 150mm
The armature commutator hotstaking Machine is assembled with safety
curtain, double-palm start
The spot welding machine can set safety password on the HMI to
avoid wrong operation
Equip with transformer if necessary to control the voltage
fluctuation
Armature rotor commutator hotstaking machine :
