NINGBO NIDE MECHANICAL EQUIPMENT CO.,LTD |
Verified Suppliers
|
|
Compression motor auto stator end coil lacing machine
Quick Detail:
1.This machine will automatically feeding and cutting and lacing.
3.PLC and touch screen control.
4. It is controlled by servo system.
Description:
Each lacing machine is PLC controlled with an inverter drive and
can be fully programmed to suit different stator slot
configurations. Stator support tooling is very quick to changeover
between different stator laminations and stack heights. A wide
range of standard lacing needles are available. This lacing machine
is suitable for lacing multi-species, less yield or more lead wire
stator. This stator coil end lacing machine adopts vertical loading
structure, Main spindle speed is adjustable.
Machine structure
This machine is consist of machine body, needle, nozzle rotating
part, needle fore and back movement,nozzle swing part, needle up
and down movement part, stator indexing part,thread feeding,thread
cutting part.
Lacing machine technical data
Min. stator ID | 33mm |
Max. stator OD | 150mm |
Over-hang height | 15~48mm |
Stator stack length | 15~120mm |
Pitch time | About 0.5~0.7sec/slot |
Power supply | 380V/50/60Hz |
Air pressure | 0.5~0.8MPa |
Power | 3KW |
Dimension | 1570 x 670 x 1680mm |
Weight | About 900kg |
Applications:
This machine is appropriate for micro induction motor like
conditioner motor, washer motor, compressor motor, fan motor,
alternator motor, pump motor etc.
Information needed for stator lacing machine inquiry
It will be better if customer could send us detailed drawing
including below information.
1. Stator lamination drawing
2. Stator stack drawing
3. Stator winding drawing
4.Winding drawing
5. Other technical requirement
If possible, it will be better if customer can send us samples.
Stator lacing machine working table