Active Member
|
[China]
Address: NO.27,Jinlanling Street,Taigongling Village Dongguan 523829,Guangdong,China
Contact name:Eric
Aolittel Technology Co.,Ltd |
|
|
Custom Dual Circuit Standard ATO ATC ATS Medium Auto Blade Fuse Holder Add A Circuit Fuse Tap Piggy Back Plug Socket Tap
Description
With the ever increasing amount of vehicles manufactured with the
CAN BUS wiring system it is becoming increasingly difficult to
locate a quick power source without cutting,splicing and soldering.
However, this little component overcomes this issue and has the
added advantage of a built in fuse holder. With this fuse adapter
tap kit, you can easy to add a extra power or connection to the
fuse box without cutting the wire. Such a practical tool, what do
you hesitate for?
Dimension (mm)
Feature
With the ever increasing amount of vehicles manufactured with the
CAN BUS wiring system it is becoming increasingly difficult to
locate a quick power source without cutting,splicing and soldering.
This little component overcomes this issue and has the added
advantage of a built in fuse holder.
Therefore is ideal for installing additional accessories,such as
phone kits, alarms, central locking kits, games consoles, hard
wired sat nav's, accessory sockets, auxiliary lights, driving
recorders, trackers etc.
Allows easy installation of additional circuits without cutting,
splicing or soldering.
Turns one fuse slot into two therefore providing individual
protection for each circuit.
| 1 | With this fuse adapter tap kit, you can easy to add a extra power or connection to the fuse box without cutting the wire. |
| 2 | Provides one fuse holder to protect existing circuit, and a second fuse holder to protect new circuit. |
| 3 | Turns one fuse slot into two therefore providing individual protection for each circuit. |
| 4 | Has the added advantage of a built in fuse holder. |
| 5 | Ideal for installing additional accessories, such as phone kits, alarms, central locking kits, games consoles, hard wired sat nav's, accessory sockets, auxiliary lights, driving recorders, trackers etc. |
Easy installation
Installation is easy:
1. Simply remove an existing fuse from the fuse box, insert that
fuse in to the bottom slot of the fuse tap.
2. Insert a suitable fuse for the new accessory in to the top slot.
3. Crimp your new live wire to the blue butt terminal on the fuse
tap.
4. Insert the fuse tap into the fuse box slot where the fuse
originally was.
Fuse Holders & Boxes Long: 18cm
We have Standard / Mini / Micro Blade for you to chooes.
For use with standard (ATO, ATC) fuses up to 10 amps.
For use with Mini (ATM, APM) fuses up to 10 amps.
For use with Micro (LOW PROFILE mini, APS, ATT) fuses up to 10
amps.
Note: Fuses are NOT included and are for illustration purpose only.
General Specifications
Insulating Body : Plastic
Applicable : For standard ATO ATC Blade Fuse 1A~40A
Wire: UL 1015 #16 AWG, Length 127mm, Red (12AWG-22AWG and length can be customzied)
Termianal material : Spring brass
Max. Voltage: 32V
Max. Current: 40A
Total Length: 18cm / 7.08"
Unit Weight: 11g
Standard Size Application: 1A 2A 3A 5A 7.5A 10A 15A 20A 25A 30A 35A
40A fuse
Fitment: Fit for standard (ATO, ATC) blade fuse
Note:
1. Please check your car fuse box before order, what kind of fuses
fit your vehicle.
2. Please allow 1-3cm error due to manual measurement. Thanks for
your understanding.
