Indoor Metallic Powder Coat , Electrostatic Spray Epoxy Polyester Powder Coating Paint

Indoor Metallic Powder Coat , Electrostatic Spray Epoxy Polyester Powder Coating Paint

Introduction:

This product adopts linear phenolic epoxy resin, polyurethane modified epoxy resin and curing agent. This product has high reactivity, strong adhesive force, high crosslinking density, the coating has excellent chemical resistance, solvent resistance, cathodic disbonding resistance, excellent flexibility, impact resistance, high temperature resistant performance, etc.

Feature:

1. Very good adhesion with the substrate.
2. Extremely strong ability of corrosion
3. Good leveling, high gloss coating surface, high compactness
4. The coating has excellent high temperature cathodic disbonding resistance.
5. Strong flexibility, can be 4/5 after flattening and pressing
6. Good high and low temperature resistant performance.
7. Strong film boiling resistance.

Power Specification

Coating specification

Carried Standard: GB/T 5135.20-2010; CJ/T 120-2008

Application Area: Fire water supply pipeline anticorrosion coating inside and outside.

Applicable process: spray coating and dip coating

Notes:

1. Steel surface should be no oil and water, surface quality should reach Sa2 1/2 level (GB/T8923), anchor pattern depth 50-90mm, clean dust and abrasive attached to the steel surface, preheat, control temperature in 180－230℃.
2. Product should be stored in ventilated, dry, indoor temperature below 30 ℃, away from heat, corrosive chemicals and chemical solvents, avoid bright light, the maximum stack height should not exceed 4 layers, avoid prolonged pressure, ensure airtight box. In case the clot and damp affects the fluidization performance.
3. To best curing epoxy coating, best anti-corrosion, suggested preheating tube surface temperature in more than 200℃, in order to better improve the curing completion.