Maestro Cardboard 3 Ply Laminator
Model: SDX-MCL1210
Introduction:
- The equipment is mainly used in jigsaw puzzle, food preservation
card, sticky rat board, fine box and other products that need to be
laminated twice or more, can produce cardboard, ash plate, KT plate
and other flat sheet with a certain degree of stiffness of the
material.
- Two mode selection: 2 ply lamination and 3 ply lamination
Features:
- Unique Dynamic Aligning System (Synchronized Laminating Mechanism):
The speed difference between faster paper delivering and front
stopper moving advances the paper to reach the front stopper, and
paper sides are aligned synchronously with side stoppers to ensure
upper and lower paper being aligned and laminated perfectly.
- Transmission System: The planet-type system allows smooth and even
distribution in power transmission by a complete set of timer
belts. Free maintenance, low noise and high efficiency.
- Low E-type Paper Holder Plate:Convenient for quick paper
replenishment by pushing pallet trolley directly to the holder
plate, or rail track is also available. Optimum E-type holder plate
and high speed elevating mechanism shorten lead time of paper
replenishment and increase efficiency.
- Newly Developed Front-top Suction Feeder: No need for adjustment
during paper-size change that fresh operator can run the machine
without intensive training. No suction mechanism above paper
stacker offers more Spacious operation room.
- Vibra-loose Collecting Mechanism: Capable of loosening mullet-laid
laminated sheets and pushing neatly to ensure smooth collection of
paper. E-type holder plate and high speed elevator jointly pull out
laminated sheets rapidly and conveniently, which greatly increase
the working efficiency.
- Motorized calibration of running speed and pressing paper Length
allows easy change-over of different paper sizes. Laminated sheets
can be overlapped together or pressed individually. The newly added
extra roller set can apply repeated heavy pressure on thinner
finished sheets for the second time to ensure smooth and exquisite
lamination.
- Three sets of HMI system: Man-machine interface, Voice Alarm and
Lamp indicating PLC. Automatically detecting running condition,
irregularities, maintenance and job record. elected electronic
elements perfect both operation and safety.
- Specially Designed High Precision Coating Mechanism: The precision
of gluing roller and glue adjusting roller can reach less than
0.01mm, and glue coating volume can be adjusted to as little as
0.02mm.
- Auto Glue Level Control: Accurately adjust coating volume required
by different paper to ensure even gluing.
- Convenient Paper Separator: Separate the paper from the gluing
roller quickly and easy for dismantling, cleaning and calibration
of the gluing roller.
- Side Stopper of Gluing Roller: Delicate side stopper can wipe the
glue back to the roller to prevent roller ends at high speed from
glue over flowing, and it can also adjust back flow of the glue to
guarantee smooth running of gluing system.
Parameter:
| Model | SDX-MCL1210 |
| Max. Paper size | 1200*1000mm |
| Min. Paper size | 450*400mm |
| Thickness of top sheet | 100-800g/m2 |
| Thickness of middle sheet | 100-800g/m2 |
| Thickness of bottom sheet | 180-1800g/m2 |
| Max. speed | 105pcs/min (subject to paper quality) |
| Accuracy | ±0.5mm (standard smooth paperboard) |
| Machine weight | 14000kgs |
| Operating space | 3*15.2m |
| Power supply | 220V/380V |
| Cable (3phase, 5 lines) | 32KW, 16sqm cable |
