Guangdong KLUK Aluminum Building Technology Co., Ltd |
Verified Suppliers
|
|
Impact Aluminum Frame Double Glass Sliding Door With Top Accessories
How to choose Aluminum Door:
1. Wind pressure resistance: especially in high floors or typhoon prone areas, wind pressure resistance directly affects safety. The wall thickness of the profile is an index to measure the wind pressure resistance of the sliding door. At the same time, it should be noted that the thicker the profile is, the better. If the profile is too thick, it will increase the self weight and affect the comprehensive performance. It is best to choose the profile with a thickness of 1.6mm
2. Air tightness: the sliding door with good air tightness can block the entry of strong wind. It can also reduce energy consumption, save energy and protect the environment when turning on the air conditioner in summer and heating in winter.
3. Water tightness: high and low rails are selected to prevent rainwater from entering the room.
4. Sound insulation performance: the glass adopts double-layer hollow toughened glass filled with argon, which can effectively block noise. At the same time, sound insulation is also related to the sealing of the door.
Glass Description
Double layer insulating glass
Insulating glass is to separate two pieces of glass by effective
sealing material and spacer material, and a desiccant absorbing
water vapor is installed between the two pieces of glass, so as to
ensure that the inner part of insulating glass is a dry air layer
for a long time, without water vapor and dust; At the same time,
insulating glass is easy to carry out mass industrial production,
so insulating glass is widely recommended in new buildings.
Two pieces of flat glass are isolated by molecular sieve, filled
with dry air in the middle and sealed by organic adhesive around.
It has good heat insulation and sound insulation performance, and
can be used as windows for buildings, refrigerated cabinets,
railway vehicles, etc.
Basic knowledge of insulating glass
Insulating glass aluminothermic process
Double layer insulating glass
Double layer insulating glass
Aluminum is called active metal element, but in the air, a dense
oxide film will form on its surface, which makes it unable to
interact with oxygen and water. At high temperature, it can react
with oxygen and release a lot of heat. With this high reaction
heat, aluminum can replace metal from other oxides (aluminothermic
method).
Insulating glass desiccant
Insulating glass desiccant is mainly used for absorbing moisture
and gas in insulating glass interlayer gas to avoid glass fogging,
keep insulating glass smooth and transparent even at very low
temperature, improve insulating and sound insulation performance of
insulating glass, and fully extend service life of insulating
glass.
Insulating glass - sealant
(1) Anti gas leakage ability( 2) Resistance to water vapor
penetration( 3) Anti ultraviolet ability( 4) Anti seepage ability(
5) Bonding system is structural.
|