Guangdong KLUK Aluminum Building Technology Co., Ltd |
Verified Suppliers
|
|
Sliding Door Introduction:
Aluminium sliding doors are a great option for opening up your home
to the outdoors without losing valuable space on the inside or out.
Our aluminium sliding doors are available in a wide range of styles
and configurations, including:
Standard Sliding Door Range, with 2 panels for smaller openings.
Entertainer or Stacker Sliding Door Range, with 3 or more panels.
Bi-Parting Sliding Door Range, with 4 or more panels, opening from
the centre.
Corner Sliding Door Range, with multiple panels opening from a
corner, with no corner post for the ultimate alfresco area.
Designed for a sleek, modern finish, our sliding doors are a great
solution for both visual impact and practicality
Wood Grain Surface Technology:
Wood transfer formula often choose high and low hydroxyl value of two kinds of polyester. If the difference between the two hydroxyl values is too small and the gelation time is not too different, the separation of the film and the transfer paper is not easy. Through a large number of experiments, we set the hydroxyl value of 75 mgKOH / g of the hydroxyl polyester resin as the reference point, > 75 mgKOH / G as the high hydroxyl value, and < 75 mgKOH / g as the low hydroxyl value. We use the polyester resin with these two hydroxyl values to obtain the film which is easy to separate from the transfer paper.Aluminum Folding Doors
Water mark transfer printing is to transfer the pattern to the plate through the material, which is a bit similar to our old printing, and the process effect is not as good as water drape transfer printing.Aluminum Folding Doors
Water drape transfer printing can not only process wood grain, but
also stone grain and leather grain. At the same time, because of
the technology, there will be no empty position of water mark
transfer printing, and the whole transfer printing will not let the
plate and printing film contact, which ensures the transfer
printing effect to a greater extent.
Performance | Parameter | National Standard |
Wind Load Resistance | 4.5<=p3>=5.0 | level 9 |
Air Tightness | 2.5<=q1<=2.0 | level 7 |
Water Tightness | 350<=△p>=700 | level 5 |
Thermal Insulation | 3.0>k>=2.5 | level 5(broke bridge) |
Sound Insulation | 35=<Rw+Ctr<40 | level 5 |
|