Deburr Surface Al6061 Aluminum Stamping Parts Metal Fixed Plate

Al6061 Aluminum Stamping Parts Aluminum Metal Stamping Fixed Plate

Aluminum stamping Parts Instroduction

Punching ability

Answer: Minutes. Pitch: 0.5mm

B: Maximum punching speed: 600SPM/min or more

C: Accuracy: ±0.003mm

D: The ratio of hole diameter to thickness 0.85:1

E: Stamping material thickness: 0.05-2.0mm

F: Zero or less material usage loss.

Aluminum stamping Parts uses various 2D and 3D cad/cam software to develop, design and plan the layout of the mold. (For a complete software list and details, see below). We have the resources to build molds for any application. When expecting to achieve mass production, we can keep the service life in mind and build reliable tools. We can also produce low-cost tools for prototyping and sampling applications. Mold protection is always in our minds, DACO Precision-Tool can have built-in sensors to help prevent expensive damage to the mold.

Riveting me is a strong and attractive way to connect parts to custom metal. The tool adds a vibrating plate, and the small parts in the middle will be located in the progressive die through the vibrating plate. Here, you will find this riveting tool is easy to riveting, and the speed is very fast, up to 120ps/munite.

In Aluminum stamping Parts, our goal is to design and manufacture composite molds with more than 100 strokes per minute to support mass production. We can achieve this by using built-in sensors and other accessories to protect the die from damage. When designing and manufacturing compound molds, always keep the cycle time in mind. We can manufacture molds to stamp parts with the precision you need.

When the feed system pushes the raw material (strip or coil) into the composite mold, parts will be produced; in each stroke or cycle, the final flat part will be punched or released from the raw material. The feed rate of the material depends on the size of the part. Larger parts require more time to exit the mold, and smaller parts can exit the mold faster, thereby reducing run time. Usually, composite molds do not need a cutting station, because the parts are punched from the strip, but it needs to be added multiple times to help manage waste. The finished parts will be removed from the mold by demolding and dropped onto the chute or slide, and then they flow into the collection box. The waste will leave the mold in strips or sheets, depending on whether you include a waste cutting station.

Use innovative, cost-effective engineering solutions to design, test and manufacture metal stamping dies for large and medium-sized complex die systems. Our manufacturing capabilities include the production of progressive dies, transfer dies, line dies, etc. Custom stamping dies can be created for various applications in the automotive and aerospace industries

Tool&Die​ Profile

what is aluminum stamping process?

The stamping process is a metal processing method, which is based on the plastic deformation of the metal, and uses the mold and the stamping equipment to apply pressure to the sheet material to cause the plastic deformation or separation of the sheet material, thereby obtaining a certain shape, size and performance Parts (stamping parts).

The stamping forming process occupies an important position in the automobile body manufacturing process, especially the large covering parts of the automobile body, because most of the shapes are complex, the structure size is large, some are still curved surfaces, and the surface quality requirements are high, so the stamping process method Making these parts is unmatched by other processing methods. Almost all of the truck's cab, front sheet metal parts, freight car panels, various body covering parts of passenger cars and various skeletons of passenger cars are made by stamping processing methods.

Aluminum stamping parts refers to stamping hardware made of aluminum alloy. There are many types of aluminum alloy materials and specifications. Metal stampings made of different aluminum alloy [1] materials have different performances and uses. .

All-New Stamping manufactures custom precision aluminum stamping parts. Our experienced staff of experts is well equipped to produce high-quality parts for our customers. From framing components for airplanes to small complex pieces used in electronics equipment, our attention to detail results in products you can trust.

Below is some questions you may want to know:

Questions: How to know the chemical composition of stainless steel deep drawing parts according to our requirements?

Answers: When we offer samples or batch parts, we will also send you our material list from our material factory, it shows more detailed.

Questions: How to guarantee your final size can meet our drawing request?

Answers: we will make moulds according to your 3D drawing. And we also do sampling when batch production start, to make assure the final dimension can meet your request.

Questions: How to make sure the color after painting or powder coating can be correct?

Answers: We have color card with different color number, such as RAL9016, we will contrast the sample surface and color card, to make sure the final surface effect is correct.

Questions: Generally, how do you packing the goods?

Answers: normally, for inner package: the goods is nude, for outer package: carton + plywood. If you have special request for inner or outer package, pls indicate it when you send us new inquiry.

Questions: If we find the defect products exist in the batch parts, how to do?

Answers: Yes,your caution is very good, in fact, when batch production, we need do sampling. Before shipment, we also do testing to make sure the quality is ok. If you found several defect product exists, pls take photos and send your quality feedback, we will check and send you quality products. But pls be assured that our products is qualified, unless caused by the worker's mistake to place.