Active Member
|
[China]
Address: No.118,Junda Road, Eastern District, Economic and Technological Development Zone,GuangZhou, China
Contact name:
Guangzhou Willstrong New Material Holding Co., Ltd |
|
|
Aluminum Cans For Beverage/ Beer Usage 1100 Series Color Coated Aluminum Coil
WILLSTRONG color-coated aluminium coil combines all advantages of modern coil-coating technology in our full-automatic production line. we can created pattern like Wood, stone, graphic as you want. The aluminium substrate gets degreased, chemically pre-treated and coated in a single production step which resulting in a high-quality uniform coating reproducible at any time and a material which has been developed for easy processing for a variety of application.
WHAT COATING MATERIAL CAN BE?
| coating type | Ployester |
| PVDF | |
| FEVE |
WHAT IS THE STRONGPOINT OF WILLSTRONG COLOR COATED ALUMINUM COIL?
| Color Coated Aluminum Coil Characteristics | High temperature resistant |
| Weathering resistant | |
| Scrubbing resistant | |
| Acid or alkali proof | |
| Sound insulation | |
| Fireproof | |
| Light weight material is easy to construct and install | |
| Bright colors | |
| Easy molding process,not rusting etc |
WHAT IS THE APPLICATION OF WILLSTRONG COLOR COATED ALUMINUM COIL?
| Application | 1.Widely used in insulation board |
| 2.Aluminum curtain wall | |
| 3.Aluminum-magnesium-manganese roofing system | |
| 4.Aluminum ceiling | |
| 5.Acp and many other areas |
WHAT IS THE SPCIFICATION OF WILLSTRONG COLOR COATED ALUMINUM COIL?
| Aluminum Alloy | ||||
| Aluminum | 1100, 3003, 5005 | |||
| Temper | H18. H16, H14 | |||
| Other alloy and temper is available upon requirements | ||||
| ||||
| Thickness | 0.06~1.0mm | |||
| Width | 1020mm,1240mm,1250mm, 1520mm, 1590mm, 1620mm | |||
| Coil Weight | 2tons, 3tons | |||
| Inner Diameter | 150mm, 405mm, 505mm | |||
| Outside Diameter | Around 1200mm | |||
| Product Tolerance | ||||
| Thickness | 0.2~0.3mm | 0.3~0.5mm | 0.5~1.0mm | |
| Tolerance | ±0.015mm | ±0.020mm | ±0.025mm | |
| Width Tolerance | ±1.5mm | |||
| For bespoke sizes and tolerance, plese contact technicist | ||||
| Mechanical Properties | |||||
| Alloy | Temper | Thickness/MM | δb/Mpa | δ0.2/Mpa | Elongation δ(500mm)/% |
| 1100 | H18 | 0.2~0.3 | ≥155 | / | ≥1 |
| >0.3~0.5 | ≥2 | ||||
| >0.5~1.0 | ≥3 | ||||
3003 | H14 H24 | 0.2~0.3 | 140~180 | >120 | ≥1 |
| >0.3~0.5 | ≥2 | ||||
| >0.5~1.0 | ≥3 | ||||
| H16 H26 | 0.2~0.3 | 165~205 | ≥145 | ≥1 | |
| >0.3~0.5 | ≥2 | ||||
| >0.5~1.0 | ≥3 | ||||
| 5005 | H18 | 0.2~0.8 | 175 | / | ≥1 |
| >0.8~1.3 | ≥125 | ≥2 | |||
| >1.3~1.6 | ≥125 | ≥3 | |||
| H14 H24 | 0.2~0.8 | 155~195 | / | ≥1 | |
| >0.8~1.3 | ≥110 | ≥2 | |||
| >1.3~1.6 | ≥110 | ≥3 | |||
| H16 H26 | 0.2~0.8 | 120~155 | / | ≥3 | |
| >0.8~1.3 | ≥85 | ≥4 | |||
| >1.3~1.6 | ≥85 | ≥6 | |||
