Active Member
|
[China]
Address: Jianmei Buliding, No.22 Xincheng Avenue, Dali Town, Nanhai District, Foshan City, Guangdong Province, China
Contact name:Mr. Kovan Jiang
Foshan Kaiya Aluminum Co., Ltd. |
|
|
1.1mm Thick Anodized Finish Kitchen/Cabinet Material OEM Aluminum Profile
Product Description ♦
Packing : Protect film for each profile, shrink film / kraft paper
exterior for each bundle or pack as customer request.
FOB port: Foshan, Shenzhen, Guangzhou
Delivery time: 15-20 days after receiving the deposite.
Payment term: 30% deposite and 70% balance after the delivery
Material: 6063 Alloy
Temper: T5
Brand name: Kaiyamei Aluminum
Finish: Mill Finished, Anodizing, Electrophoresis, Powder Coating
,Polish, Wood grain, Sand Blasting
Color: Clear Satin, Bronze, Black, Golden, Silver, or as customer's
request
Thickness: 1.1mm
MOQ: 500KG. Usually 12 tons for a 20 feet container; 24 tons for a
40 feet container.
Length: 5.8-5.98m, or as customer's request
Sample delivery: Two weeks (one week for mould +one week making
sample)
Sample design: It is better we can get your drawing or sample, we
mainly make according to your design, and we can keep confidential
for your design.
Maximum extruder machine: 8000 tons; Minimum extruder machine: 500
ton
FAQ ♦
Q1:What is aluminum extrusion, fabrication, and anodization?
A: Aluminum Extrusion refers to a process of creating shapes with
an aluminum billet or log by forcing it to flow through a shaped
opening in a die. Aluminum can be extruded into standard shapes or
specific designs depending on a customer’s preference.
Aluminum Fabrication refers to building aluminum components by
cutting, drilling, slotting, tapping,bending, CNC machining,
mechanical assembly and welding.
Aluminum Anodization is an electro-chemical process of coating
aluminum with a thin layer of oxide to increase corrosion
resistance and harden the surface.
Aluminum also can be dyed with various anodizing colours,which in
most widely used is Brone shades.
Q2: What’s the thickness for anodizing? Can you do 15um?
A: Our normal thickness is about 10 um. Yes, we can do 15um and
above.
Q3: What color you can do for powder coating? The thickness for
powder coat?
A: We can do any color for powder coat as long as you can provide
the color sample. Our normally powder coating thickness is 60-80um.
Q4: What color you can do for wood grain?
A: Our most popular colors are Western Red Cedar, Australia Cedar,
Jarrah I, Jarrah II, Chestnut, Bush Cherry, Bush Wood, Western
Wood, Snow Gum, etc. If you need any other colors, we can do
according to the color samples you provide.
Q5: What’s the delivery time for samples and mass production?
A: (1). 2-3 weeks to open the new moulds and make samples.
(2). 3-4 weeks after receipt of deposit and
confirmation of the order.
General Chemical Composition of Alloy
| Alloy | 6063(%) | 6061(%) | 6082(%) |
| Silicon Si | 0.20~0.60 | 0.40~0.80 | 0.7~1.2 |
| Iron Fe | 0.35 | 0.70 | 0.5 |
| Copper Cu | 0.10 | 0.15~0.40 | 0.1 |
| Manganese Mn | 0.10 | 0.15 | 0.4~0.8 |
| Manganese Mg | 0.45~0.90 | 0.18~1.2 | 0.6~0.8 |
| Chromium Cr | 0.10 | 0.04~0.35 | 0.25 |
| Zine Zn | 0.10 | 0.25 | 0.2 |
| Titanium Ti | 0.10 | 0.15 | 0.1 |
| Others(each) | 0.05 | 0.05 | 0.05 |
| Others | 0.15 | 0.15 | 0.15 |
| Aluminum | Remainder | Remainder | Remainder |
Advantages of the extrusion process
| ||
The extrusion process provides virtually unlimited opportunities for aluminium product shapes. Costs are cut by designing fewer components, which reduce fabrication and simplify assembly.
| ||
| These features and benefits are unmatched by other materials and processes | ||
| Complex integral shapes | Cost effective | Low tooling costs |
| Design flexibility | Versatility in joining | Machinable |
| Rapid prototyping | Short lead times | Wide range of finishes |
Our Company♦
