|
[China]
Trade Verify
Address: D-705, Dongchuang Science and Technology Park, No.216 Jinfeng Road, Suzhou, Jiangsu, China
Contact name:Tracy
Trumony Aluminum Limited |
|
Verified Suppliers
|
|
|
Damp Proofing 5454 O/H32 Aluminum Foil with High Quality for Marin Shipbuilding
1.Introduction
As aluminum reserves in the crust is very rich, It has more advantages over other metals. Aluminum in the future will still have a wide range of applications, for example, the car manufacturers are currently exploring the use of aluminum instead of steel, and make the car lighter. With the progress of technology, aluminum products not only in the aerospace, transportation, electronic power, construction and other traditional applications but also continue to grow rapidly in the new areas.
The strength of 5454 O/H32 aluminum coil is 22% higher than 5052. With good anti-corrosion as well as weldability, but general formability. It's main usage are for the structure of hulls and pipes of pressure vessels, etc.
Application: Aluminum is the material of first selection of designers in high-speed ship, such as express ferries, LNG spherical tank type fluid reservoirs, hydrofoils, offshore working ships and yachts, and is widely used to shipboards, bottom plating, portholes, carrier plates and side plates of ship containers, etc.
| Applications | Alloy |
| shipboards/hull bottoms/shell plating | 5083/5080/5456/5052 |
| keels/frames | 5083 |
| ribbed paltes/bulkhesd | 5083/6061 |
| pedestals of engines | 5083 |
| decks | 5083/5052/5086/5454/6456/7039 |
| rudder huose | 5083/5052/6063 |
| stack | 5083/5052 |
| porthole | 5083/5052/6063 |
| bulwark | 5083 |
| gangway ladder | 5083/5052/6063/6061 |
| carrier plate and side plates of vessels | 3003/3004/5052 |
| LNG ship spherical tank type | 5083 |
2.The flow chart
3.Specification(5086)
Dimensions:T(1.5-120)*W(1000-3100)*(1000-13000)mm
Metal content
Si: ≤0.40
Fe: ≤0.50
Cu: ≤0.10
Zn: ≤0.25
Mn: 0.20-0.70
Mg: 3.50-4.50
Cr: 0.05-0.25
Ti: ≤0.15
Al: Remainder
| Alloy NO. | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Other | Al |
| 1050 | 0.25 | 0.4 | 0.05 | 0.05 | 0.05 | 0.05 | 0.03 | 0.03 | ≥99.5 | |
| 3003 | 0.6 | 0.7 | 0.05-0.2 | 1.0-1.5 | 0.1 | 0.05 | Remainder | |||
| 4047 | 11.0-13.0 | 0.8 | 0.3 | 0.15 | 0.1 | 0.2 | Remainder | |||
| 5052 | 0.25 | 0.4 | 0.1 | 0.1 | 2.2-2.8 | 0.15-0.35 | 0.1 | Remainder | ||
| 6061 | 0.4-0.8 | 0.7 | 0.15-0.4 | 0.15 | 0.8-1.2 | 0.04-0.35 | 0.25 | 0.15 | Remainder | |
| 7075 | 0.4 | 0.5 | 1.2-2.0 | 0.3 | 2.1-2.9 | 0.18-0.28 | 5.1-6.1 | 0.2 | Remainder |
4.Company
Trumony Aluminum Limited is committed to providing clean aluminum material solution to the market. 'Through the discovery and creation, to bring value to customers' is the company philosophy. A manufacturer of aluminum materials with many years' experience, it was established in 2006. Through years of developing, we have supplied products to many large companies with different series of materials. Now we are widely engaged in transportation, heat exchange, cable, packaging, construction, electronics, environmental protection and other fields, Apart from our current production, we are also actively developing new aluminum materials and searching for customers solutions which is best suited for different industries to meet the precise needs of customers.
If you have the need about slitting, cutting and deep-producing, you can contact us.
Hope we can build the relationship in the future.
Good luck!
