Active Member
|
[China]
Address: D41-1/01 BLOCK,D FENQU,XIPENG ZUTUAN,XIANGTANG VILLAGE,XIPENG TOWN,JIULONGPO DISTRICT,CHONGQING
Contact name:Masha Cui
Chongqing Dongchong Aluminum Co., Ltd. |
|
|
1100 H24 PE 18 Micron White Back Coating Aluminium Coil Strip 0.21 mm Thickness for Composite Aluminum Plate
Product Description
1100 aluminum alloy is general industrial pure aluminum with 99.0% aluminum content. Can not be strengthened by heat treatment; the strength is low, but it has good ductility. Formability, weldability and corrosion resistance; after anodizing, it can further improve its corrosion resistance and at the same time obtain a beautiful surface.
1000 series aluminum alloy represents 1050, 1060, 1100 series. Of all the series, 1000 series belongs to the series with the highest aluminium content. The purity can reach over 99.00%. Because it does not contain other technical elements, the production process is relatively simple and the price is relatively cheap. It is the most commonly used series in conventional industries. The majority of the market circulation is 1050 and 1060 series. The lowest aluminium content of 1000 series aluminium sheets is determined by the last two Arabic numerals. For example, the last two Arabic numerals of 1050 series are 50. According to the naming principle of international brands, the aluminium content must be above 99.5% before qualified products are obtained. Our country's aluminium alloy technical standard (gB/T3880-2006) also clearly stipulates that the aluminium content of 1050 reaches 99.5%. Similarly, the aluminium content of 1060 series aluminium plates must reach 99.6%
| Aluminum alloy coil can be divided into non-painted products and painted products according to their surface treatment methods. |
| 1, Non-painted products |
| (1) It can be divided into hammer-pattern aluminium plate (irregular pattern), embossing plate (regular pattern) and pre-passivation, anodic alumina surface treatment plate. |
| (2) Such products do not need to be painted on the surface of sheet metal, and they do not require high surface appearance and low price. |
| 2, Painting products |
| (1) Classification: |
| According to the coating process can be divided into: spray plate products and pre-roll coating plate; |
| According to the type of paint, it can be divided into: polyester, polyurethane, polyamide, modified silicon, epoxy resin, fluorocarbon and so on. |
| (2) Among various coatings, the main performance difference is the resistance to sunlight ultraviolet rays. The most commonly used coating on the front is fluorocarbon paint (PVDF), which has strong resistance to ultraviolet rays. Polyester or epoxy resin coatings can be selected as protective coatings on the back. In addition, a tearable protective film can be attached to the front. |
| Fluorocarbon spraying Coil |
| (1) Fluorocarbon spraying coil is divided into two-coating system, three-coating system and four-coating system, and multi-layer coating system is generally suitable. |
| Two coating systems: 5-10 micron fluorocarbon primer and 20-30 micron fluorocarbon topcoat. The total film thickness should not be less than 35 micron. It can only be used in general environment. |
| The three-coat system consists of 5-10 micron fluorocarbon primer, 20-30 micron fluorocarbon paint and 10-20 micron fluorocarbon varnish. The total thickness of the film should not be less than 45 micron. It is suitable for severe air pollution, industrial zones and coastal areas with harsh environment. |
| Four coatings system: Four coatings system has two kinds. One is to add a 20-micron fluorocarbon intermediate paint between the primer and the top coat when using large particle aluminium powder pigments; the other is to add a compact coating of polyamide and polyurethane blends between the primer and the top coat to improve its corrosion resistance and increase the service life of the fluorocarbon aluminium plate. Because the general fluorocarbon paint is a sponge structure, there are stomata, can not prevent the positive and negative ions in the air free penetration to the metal plate base. Therefore, this coating system is more suitable for severe air pollution, industrial zones and coastal areas. |
| (2) Curing of fluorocarbon baking paint: it should be a few coatings on a few bakes, so that each layer of baking paint is completely cured, forming a good bonding, corrosion resistance, fading resistance, to avoid more coatings and less baking. |
| (3) When choosing fluorocarbon baking varnish aluminium sheet, attention should be paid to the brand and main technical indicators of fluorocarbon paint, and the content of fluororesin should be more than 70%. |
Specification
| Type | Aluminium Alloy Coil Strip |
Material | 1000 Series:1050 1060 |
| Temper | H12, H14, H16, H18, H22, H24, H26 |
| Specifications | Thickness 0.006-200mm or as your required Width :6mm-1200mm or as your required.Length:1000-6000mm or as your required |
| Surface | PE,PVDF |
| Standard | ATSTM B209, JIS H4000-2006,GB/T3190-2008,GB/T3880-2006 |
| Application | 1) Kitchenware, food and chemical products processing and storage devices; 2) Aircraft fuel tanks, oil pipe, rivets, wire; 3) Cans cover, car body panels, steering plates, stiffeners, brackets and other components; 4) Manufacturing trucks, tower building, ship, train, furniture, machinery parts, precision machining with the tubes, rods, shaped, sheet metal. |
| Trade Information | Packaging Details:Wooden pallet,Wooden box |
| Delivery Detail:3-5days for stock, 10-15days for normal size,25-30days for customized size | |
| MOQ :500kg-5000kg according to different products | |
| Supply Ability:10000tons per month | |
| Payment terms: TT,LC |
| ALLOY | CHEMICAL COMPOSITION (%) | |||||||||||||
| Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn | Ti | Zr | Other | Al | |||
| 1035 | 0.35 | 0.6 | 0.1 | 0.05 | 0.05 | __ | __ | 0.1 | 0.03 | __ | 0.03 | __ | 99.35 | |
| 1100 | 0.95 | 0.05-0.2 | 0.05 | __ | __ | __ | 0.1 | __ | __ | 0.05 | 0.15 | 99 | ||
| 1050 | 0.25 | 0.4 | 0.05 | 0.05 | 0.05 | __ | __ | 0.05 | 0.03 | __ | 0.03 | __ | 99.5 | |
| 1060 | 0.25 | 0.35 | 0.05 | 0.03 | 0.05 | __ | __ | 0.05 | 0.03 | __ | 0.03 | __ | 99.6 | |
| 1070 | 0.2 | 0.25 | 0.04 | 0.03 | 0.03 | __ | __ | 0.04 | 0.03 | __ | 0.03 | __ | 99.7 | |
| 1080 | 0.15 | 0.15 | 0.03 | 0.02 | 0.02 | __ | __ | 0.03 | 0.03 | __ | 0.02 | __ | 99.8 | |
| 1045 | 0.3 | 0.45 | 0.1 | 0.05 | 0.05 | __ | __ | 0.05 | 0.03 | __ | 0.03 | __ | 99.45 | |
| 1145 | 0.15 | 0.3-0.5 | 0.02 | 0.05 | 0.05 | __ | __ | 0.1 | 0.03 | __ | 0.03 | __ | 99.35 | |
| 1200 | 1 | 0.05 | 0.05 | __ | __ | __ | 0.1 | 0.05 | __ | 0.05 | 0.15 | 99 | ||
| 1235 | 0.65 | 0.05 | 0.05 | 0.05 | __ | 0.1 | 0.06 | __ | 0.03 | __ | 99.35 | |||
| 2014 | 0.5-1.2 | 0.7 | 3.9-5.0 | 0.4-1.2 | 0.2-0.8 | 0.1 | 0.25 | 0.15 | 0.05 | 0.15 | rest | |||
| 2A12 | 0.5 | 0.5 | 3.8～4.9 | 0.3-0.9 | 1.2-1.8 | 0.1 | 0.3 | 0.15 | __ | 0.05 | 0.15 | rest | ||
| 2017 | 0.2-0.8 | 0.7 | 3.5-4.5 | 0.4-1.0 | 0.4-0.8 | 0.1 | 0.25 | 0.15 | 0.05 | 0.15 | rest | |||
| 2024 | 0.5 | 0.5 | 3.8-4.9 | 0.3-0.9 | 1.2-1.8 | 0.1 | 0.25 | 0.15 | 0.05 | 0.15 | rest | |||
| 3003 | 0.6 | 0.7 | 0.05-0.2 | 1.0-1.5 | 0.1 | 0.05 | 0.15 | rest | ||||||
| 3004 | 0.3 | 0.7 | 0.25 | 1.0-1.5 | 0.8-1.3 | __ | __ | 0.25 | __ | __ | 0.05 | 0.15 | rest | |
| 3104 | 0.6 | 0.8 | 0.05-0.25 | 0.8-1.4 | 0.8-1.3 | __ | __ | 0.25 | 0.1 | __ | 0.05 | 0.15 | rest | |
| 3105 | 0.6 | 0.7 | 0.3 | 0.3-0.8 | 0.2-0.8 | 0.2 | __ | 0.4 | 0.1 | __ | 0.05 | 0.15 | rest | |
Product Photo
Company Introduction
Chongqing Dongchong Aluminum Co,.Ltd.established in 2002 and have been in aluminium indurstry for more than 17 years.After more than ten years of rapid development, it now has more than 100 employees, more than 15,000 square meters of standard factory buildings and more than 2,000 square meters of office area.
The evelopment concept of corporate Innovation and Practicality Beyond Self-Pursuing Excellence. Dongchong's Mission is While creating value for the society, we should take effective measures to increase employees'income, make them have more time and wealth to control, and constantly improve employees' happiness index. Our business philosophy is Honesty, Cooperation and Win-win .Service Concept is "It is our duty to satisfy all our customers.It's our task for all our customers to praise Dongchong".
We mainly provide Aluminum Alloy Sheet ,Aluminum Circle Sheet ,Diamond Aluminum Sheet ,Aluminum Flat Strips ,Aluminum Alloy Plate,Aluminum Foil ,Aluminum Checker Plate,Aluminum Coil Strip ,Aluminum Hollow Pipe ,Aluminum Extrusion Profiles ,Custom Aluminum Panels ,Aluminum Solid Bar ,Aluminum Cabin Luggage.
| Equipment Production Parameters By Chongqing Dongchong Aluminum Co.,Ltd | |||||||
| 1650mm Slitting machine | Uncoil(MM) | Finished size(MM) | Slitting Width(MM) | ||||
| ID | OD | Width | Thickness | ID | OD | Above 0.5mm≥ 20mm | |
| Φ 400 | ≤ 1800 | ≤ 1600 | 0.5-4.5 | Φ 400 | ≤ 1700(normal) | ||
| Φ 500 | Φ500(normal) | ||||||
| Φ 600 | |||||||
| Aluminum foil Slitting machine | Uncoil(mm) | Finished size(MM) | |||||
| ID | OD | Width | Thickness | ID | OD | Width | |
| Φ 76 | ≤ 550 | ≤ 1200 | 0.08-0.12 | Φ76Φ76 | ≤ 550(normal) | ||
| 1450mm Crosscutting machine | Uncoil(MM) | Finished size(MM) | |||||
| ID | OD | Width | Thickness | ID | OD | Width | |
| Φ 505 | ≤ 1780 | ≤ 600 | 0.1-1.5 | Φ150 Φ500 | ≤ 1700(normal) | 6-600 | |
| Φ 605 | |||||||
| Annealling Furnace | Furnace Temperature | Furnace Size | |||||
| ≤440°C | 3200*2000*2100 | ||||||
| Saw Cutting | Thickness(mm) | Width (mm) | Length (mm) | ||||
| Size | Size | Tolerance | Size | ||||
| ≤200 | ≤2000 | ±0.3 | ≤3000 | ||||
| Embossing Machine | Type | Thickness(MM) | Width(MM) | ||||
