Active Member
|
[China]
Address: D41-1/01 BLOCK,D FENQU,XIPENG ZUTUAN,XIANGTANG VILLAGE,XIPENG TOWN,JIULONGPO DISTRICT,CHONGQING
Contact name:Masha Cui
Chongqing Dongchong Aluminum Co., Ltd. |
|
|
5005 H116 Anodized Aluminium Coil Strip For for Indoor Decoration
Product Description
5005 aluminum alloy has medium strength and good corrosion resistance, and the oxide film is brighter. 5005 aluminum alloy is used as conductor, cookware, instrument panel, shell and building decoration.
Anodic oxidation (anodic oxidation), the electrochemical oxidation of metals or alloys. The process of forming an oxide film on aluminum products (anode) under the corresponding electrolyte and specific process conditions due to the effect of external current.
In order to overcome the defects of surface hardness and wear resistance of aluminum alloy, expand the scope of application and extend the service life, surface treatment technology has become an indispensable part in the use of aluminum alloy, and anodizing technology is currently the most widely used and most successful of.
Chemical Composition
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Mechanical properties:
| Alloy | Temper | Thickness(mm) | Tensile strength(Mpa) | Yeild strength(Mpa) | Elongation(%) |
| Min | |||||
| 5005 | O H111 | ＞0.20 — 0. 50 | 100—145 | 35 | 15 |
| ＞0. 50〜1.50 | 19 | ||||
| ＞1.50 — 3. 00 | 20 | ||||
| >3, 00 — 6, 00 | 22 | ||||
| >6.0-12.5 | 24 | ||||
| >12.5-50 | |||||
| H12 | >0.20 — 0. 50 | 125-165 | 95 | 2 | |
| ＞0. 50〜1.50 | 2 | ||||
| >1.50 — 3. 00 | 4 | ||||
| >3, 00 — 6, 00 | 5 | ||||
| H22 H32 | >0.20 — 0.50 | 125 — 165 | 80 | 4 | |
| >0. 50〜1. 50 | 5 | ||||
| >1. 50 — 3.00 | 6 | ||||
| >3.00 — 6.00 | 8 | ||||
| H24 H34 | >0. 20 — 0.50 | 145 — 185 | 110 | 3 | |
| >0.50—1. 50 | 4 | ||||
| >1, 50—3, 00 | 5 | ||||
| >3. 00 — 6. 00 | 6 | ||||
| H26 H36 | >0.20 — 0. 50 | 165 — 205 | 135 | 2 | |
| >0. 50—1.50 | 3 | ||||
| >1.50 — 3.00 | 4 | ||||
| >3.00 — 4.00 | 4 | ||||
| H28 H38 | >0. 20 — 0.50 | 185 | 160 | 1 | |
| >0.50 — 1.50 | 2 | ||||
| >1.50 — 3.00 | 3 | ||||
| H112 | >6, 00 —12. 50 | 115 | —— | — | |
| >12. 50 — 40. 00 | 105 | — | |||
| >40.00 — 80. 00 | 100 | — | |||
| Specification | ||
| Alloy | Temper | Thickness/mm |
| 1050,1060,1070, 1100,3003,5005 | H12,H14,H16,H18 ,H24 | >0.20~3.00 |
| 5052 | H12,H22,H24,H32,H34 | |
| 6061,6063 | T5,T6 | |
Product Photo
Company Introduction
Chongqing Dongchong Aluminum Co,.Ltd.established in 2002 and have been in aluminium indurstry for more than 17 years.After more than ten years of rapid development, it now has more than 100 employees, more than 15,000 square meters of standard factory buildings and more than 2,000 square meters of office area.
The evelopment concept of corporate Innovation and Practicality Beyond Self-Pursuing Excellence. Dongchong's Mission is While creating value for the society, we should take effective measures to increase employees'income, make them have more time and wealth to control, and constantly improve employees' happiness index. Our business philosophy is Honesty, Cooperation and Win-win .Service Concept is "It is our duty to satisfy all our customers.It's our task for all our customers to praise Dongchong".
We mainly provide Aluminum Alloy Sheet ,Aluminum Circle Sheet ,Diamond Aluminum Sheet ,Aluminum Flat Strips ,Aluminum Alloy Plate,Aluminum Foil ,Aluminum Checker Plate,Aluminum Coil Strip ,Aluminum Hollow Pipe ,Aluminum Extrusion Profiles ,Custom Aluminum Panels ,Aluminum Solid Bar ,Aluminum Cabin Luggage.
| Equipment Production Parameters By Chongqing Dongchong Aluminum Co.,Ltd | |||||||
| 1650mm Slitting machine | Uncoil(MM) | Finished size(MM) | Slitting Width(MM) | ||||
| ID | OD | Width | Thickness | ID | OD | Above 0.5mm≥ 20mm | |
| Φ 400 | ≤ 1800 | ≤ 1600 | 0.5-4.5 | Φ 400 | ≤ 1700(normal) | ||
| Φ 500 | Φ500(normal) | ||||||
| Φ 600 | |||||||
| Aluminum foil Slitting machine | Uncoil(mm) | Finished size(MM) | |||||
| ID | OD | Width | Thickness | ID | OD | Width | |
| Φ 76 | ≤ 550 | ≤ 1200 | 0.08-0.12 | Φ76Φ76 | ≤ 550(normal) | ||
| 1450mm Crosscutting machine | Uncoil(MM) | Finished size(MM) | |||||
| ID | OD | Width | Thickness | ID | OD | Width | |
| Φ 505 | ≤ 1780 | ≤ 600 | 0.1-1.5 | Φ150 Φ500 | ≤ 1700(normal) | 6-600 | |
| Φ 605 | |||||||
| Annealling Furnace | Furnace Temperature | Furnace Size | |||||
