Active Member
|
[China]
Contact name:Crystal Zhang
Luoyang Tailian New Material Co., Ltd. |
|
|
| Mill Finish Aluminum Coil / Sheet for Metal Ceiling | |
| Alloy and Temper | Alloys: 1050, 1100, 3003,3005,3105, 5005,5052,8011,etc Temper: O, H1X, H2X, H3X |
| Widths | 35mm - 2,500 mm available |
| Thickness | 0.1mm - 3mm |
| Length | Coil |
| Surface Treatment | Mill finish; Perforation; Stucco Embossed; |
| Coil Specifications | I.D.: 405mm, 505mm O.D.: 800mm - 1800mm |
| Packing Detail | Wooden pallet eye to wall or eye to sky |
| Application | Building material such as metal ceiling, roofing, wall cladding panel; Automobiles, etc. |
Chemical composition
| Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Al | |
| 1060 | 0.250 | 0.350 | 0.050 | 0.030 | 0.030.- | - | 0.050 | 0.030 | 99.6 |
| 1070 | 0.200 | 0.250 | 0.040 | 0.030 | 0.030 | - | 0.040 | 0.030 | 99.7 |
| 1100 | Si+Fe:0.95 | 0.05-0.2 | 0.050 | - | - | 0.100 | - | 99.0 | |
| 3003 | 0.600 | 0.700 | 0.05-0.20 | 1.0-1.5 | - | - | 0.100 | - | remains |
| 3105 | 0.600 | 0.700 | 0.300 | 0.30-0.8 | 0.20-0.8 | 0.200 | 0.400 | 0.100 | remains |
| 5052 | 0.250 | 0.400 | 0.100 | 0.100 | 2.2-2.8 | 0.15-0.35 | 0.100 | - | remains |
| 5154 | 0.250 | 0.400 | 0.100 | 0.100 | 3.1-3.9 | 0.15-0.35 | 0.200 | 0.200 | remains |
| 5754 | 0.400 | 0.400 | 0.100 | 0.500 | 2.6-3.6 | 0.300 | 0.200 | 0.150 | remains |
| 5182 | 0.200 | 0.350 | 0.150 | 0.20-0.50 | 4.0-5.0 | 0.100 | 0.250 | 0.100 | remains |
| 6061 | 0.3-0.7 | 0.500 | 0.100 | 0.030 | 0.35-0.8 | 0.030 | 0.100 | - | remains |
| 8011 | 0.5-0.9 | 0.6-1.0 | 0.100 | 0.200 | 0.050 | 0.050 | 0.100 | 0.080 | remains |
| 8079 | 0.200 | 0.300 | 1.0-1.6 | 0.100 | 0.6-1.3 | 0.100 | 0.250 | 0.100 | remains |
General Application of Aluminum Alloy Coil:
Household Appliance;
Transformer strip,
PS printed materials substrate,
Building decoration materials,
Stamping products,
Building materials,
Nameplate,
Insulation materials,
Aluminum plastic composite material,
Capacitor strip,
Welding parts,
Heat exchanger,
Kitchen utensils,
Reflecting apparatus etc
Details as following:
| 1)1000 Series Alloy (Generally called commercial pure aluminum,Al>99.0%) | |
| Alloy | 1050 1050A 1060 1070 1100 |
| Temper | O/H111 H112 H12/H22/H32 H14/H24/H34 H16/ H26/H36 H18/H28/H38 H114/H194, etc. |
| Specification | Thickness≤30mm; Width≤2600mm; Length≤16000mm OR Coil (C) |
| Application | Lid Stock, Industrial Device, Storage, All Kinds of Containers, etc. |
| Feature | Lid Shigh conductivity, good corrosion resistant performance, high
latent heat suitable for heat treatments. |
| 2)3000 Series Alloy (Generally called Al-Mn Alloy, Mn is used as main alloy element) | |
| Alloy | 3003 3004 3005 3102 3105 |
| Temper | O/H111 H112 H12/H22/H32 H14/H24/H34 H16/H26/ H36 H18/H28/H38 H114/H194, etc. |
| Specification | Thickness≤30mm; Width≤2200mm Length≤12000mm OR Coil (C) |
| Application | Decoration, heat-sink device, external walls, storage, sheets for construction, etc. |
| Feature | Good rust resistance, not suitable for heat treatments, good corrosion resistant performance, well welding property, good plasticity, low strength but suitable for cold working hardening |
| 3)5000 Series Alloy (Generally called Al-Mg Alloy, the Mg is used as main alloy element) | |
| Alloy | 5005 5052 5083 5086 5182 5754 5154 5454 5A05 5A06 |
| Temper | O/H111 H112 H116/H321 H12/H22/H32 H14/H24/H34 H16/H26/H36 H18/H28/H38 H114/H194, etc. |
| Specification | Thickness≤170mm; Width≤2200mm ; Length≤12000mm |
| Application | Marine Grade Plate, Ring-Pull Can End Stock, Ring-Pull Stock,
Automobile Body Sheets, Automobile Inside Board, The Protective Cover On Engine. |
| Feature | All the advantages of normal aluminium alloy, high tensile strength & yield strength, good corrosion resistant performance, well welding property, well fatigue strength, and suitable for anodic oxidation. |
| 4)6000 Series Alloy (Generally called Al-Mg-Si Alloy, the Mg and Si are used as main alloy elements ) | |
| Alloy | 6061 6063 6082 |
| Temper | O F, etc. |
| Specification | Thickness≤170mm; Width≤2200mm ; Length≤12000mm |
| Application | Automotive, Aluminium For Aviation, Industrial Mould, Mechanical Components, Transport Ship, Semiconductor Equipments, etc |
| Feature | Good corrosion resistant performance, well welding property, good oxidability, easy to spray-finishing, well oxidation coloring, good machinability. |
Aluminum and its alloys are today considered one of the most practical of metals for a variety of reasons. Its
low cost, light-weight, and modern appearance are among the primary reasons for its widespread use. It is
non-sparking, electrically conductive, thermally conductive, non-magnetic, reflective, and chemically resistant.
It is popular in the construction, marine and aircraft industries because of its ease of fabrication, non-toxicity,
strength (pound-for pound), and resistance to the corrosive atmospheres of industry and marine
environments. Anodizing increases this corrosion resistance and also permits iridescent finishes in different
colors. Some alloys are slightly corrosive and so are cladded with a thin layer of aluminum for added
protection.
