|
[China]
Trade Verify
Address: No. 1887, Chenqiao Road, Fengxian District, Shanghai
Contact name:Winnie
Shanghai Walmay Metal Group Co., Itd |
|
Verified Suppliers
|
|
|
1 2 Inch Alloy Brushed Aluminum Sheets 1050 1060 1070 1100 Aluminum Plate Metal 4x8
1060 aluminum sheet belongs to the 1000 series alloy aluminum sheet and is a commonly used series in aluminum strips. 1060 aluminum sheet is a commonly used series, also known as pure aluminum sheet, ordinary aluminum sheet, corrosion-resistant aluminum sheet, commonly used aluminum sheet, etc. The 1060 aluminum sheet produced by Shanghai Walmay Metal Group can achieve a process level of single-sided oxidation without problems. Because the 1060 aluminum sheet has a good aluminum content, it has good elongation and tensile strength, and can fully meet conventional processing requirements (stamping, stretching) and high formability.
Product Parameters :
1)Product Specification and Steel Grade
| Type | 1060 Aluminum Sheet |
| 1000 Series | 1050 1060 1070 1100 |
| 2000 Series | 2024(2A12), LY12, LY11, 2A11, 2A14(LD10), 2017, 2A17 |
| 3000 Series | 3A21, 3003, 3103, 3004, 3005, 3105 |
| 4000 Series | 4A03, 4A11, 4A13, 4A17, 4004, 4032, 4043, 4043A, 4047, 4047A |
| 5000 Series | 5052, 5083, 5754, 5005, 5086,5182 |
| 6000 Series | 6063, 6061, 6060, 6351, 6070, 6181, 6082, 6A02 |
| 7000 Series | 7075,7050,7A04,7472,7475 |
| Thickness(mm) | aluminum plate 0.2mm-300mm |
| Width(mm) | 100-2800mm |
| Length(mm) | 2000mm,2440mm,6000mm, or as required. |
| Surface | Wire drawing, oxidation, PS, Mirror surface, Embossing, etc |
| Temper | H111 H112 H116/H321 H12/H22/H32 H14/H24/H34/H16/H26/H36 H18/H28/H38 H114 |
| Type | coil/sheet/strips/plate |
| Payment | L/C, T/T, D/P, West Union, etc. |
| Package | Standard export packages, such as Wooden pallets |
2)Chemical Composition
| Alloy | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Others: | Others: | Al: Min. |
| Each | Total | ||||||||||
| 1050 | 0.25 | 0.4 | 0.05 | 0.05 | 0.05 | - | 0.05 | 0.03 | 0.03 | - | 99.5 |
| 1060 | 0.25 | 0.35 | 0.05 | 0.03 | 0.03 | - | 0.05 | 0.03 | 0.03 | - | 99.6 |
| 1100 | 0.95 Si + Fe | 0.05~0.20 | 0.05 | - | - | 0.1 | - | 0.05 | 0.15 | 99 | |
| 3003 | 0.6 | 0.7 | 0.05~0.20 | 1.0~1.5 | - | - | 0.1 | - | 0.05 | 0.15 | remainder |
| 3004 | 0.3 | 0.7 | 0.25 | 1.0~1.5 | 0.8~1.3 | - | 0.25 | - | 0.05 | 0.15 | remainder |
| 3005 | 0.6 | 0.7 | 0.3 | 1.0~1.5 | 0.2~0.6 | 0.1 | 0.25 | 0.1 | 0.05 | 0.15 | remainder |
| 5005 | 0.3 | 0.7 | 0.2 | 0.2 | 0.5~1.1 | 0.1 | 0.25 | - | 0.05 | 0.15 | remainder |
| 5052 | 0.25 | 0.4 | 0.1 | 0.1 | 2.2~2.8 | 0.15~0.35 | 0.1 | - | 0.05 | 0.15 | remainder |
| 5754 | 0.4 | 0.4 | 0.1 | 0.5 | 2.6~3.6 | 0.3 | 0.2 | 0.15 | 0.05 | 0.15 | remainder |
| 5083 | 0.4 | 0.4 | 0.1 | 0.4~1.0 | 4.0~4.9 | 0.05~0.25 | 0.25 | 0.15 | 0.05 | 0.15 | remaind |
Aluminum Plate Product Factory Building:
1060 aluminum plate belongs to the more common aluminum plate alloy series in the casting-cold rolling process. Shanghai Walmay Metal Group can provide you with H24 state, H14 state, H16 state, H22 state, O state, and H18 without annealing state.
Aluminum Sheet Application:
Application scope: thermal insulation, exterior walls,
transportation, and other fields
Applications: Cookware, trim, awnings, siding, storage tanks, and
more.
1060 is the most widely used of all aluminum alloys. It is
essentially commercial pure aluminum with added manganese.
Therefore, it has all the good properties of 1100 but with greater
strength. 1060 aluminum plate has excellent corrosion resistance.
1060 aluminum plate has excellent processing properties and can be
deep drawn or spun, welded, or brazed.
Aluminum Sheet Package:
FAQ
Q1. Where is your factory?
A1: Our company’s processing center is located in Wuxi, Jiangsu, China. It is well equipped with kinds of machines, such as laser
cutting machine, mirror polishing machine and so on. We can provide
a wide range of personalized services according to the customers’
needs.
Q2. What are your company's main products?
A2: Our main products are stainless steel plate/sheet, coil,
round/square pipe, bar, channel, etc.
Q3. How do you control quality?
A3: Mill Test Certification is supplied with shipment, Third Party
Inspection is available.
Q4. What are the advantages of your company?
A4: We have many professionals, technical personnel, more
competitive prices, and better after-sale service than other
stainless steel companies.
Q5. How many countries have you already exported?
A5: Exported to more than 50 countries mainly from America, Russia,
UK, Kuwait, Egypt, Turkey, Jordan, India, etc.
Q6. Can you provide a sample?
A6: Small samples in store and can provide the samples for free.
Customized samples will take about 5-7 days.
