Shanghai Walmay Metal Group Co., Itd |
Verified Suppliers
|
|
Aluminum Coil 0.2mm 0.3mm 0.4mm Thickness Aluminum Coils 3A21, 3003, 3103, 3004, 3005, 3105 Aluminum Rolls
3004 aluminum alloy coil is a non-heat-treatable aluminum-manganese
alloy, commonly used for various applications where moderate
strength and good formability are required.
3004 aluminum alloy coil is commonly used to produce the body of
cans, the light components. It can also be used for the processing
and storage equipment of chemical products, sheet processing, some
construction tools, etc.
1, Product Parameters :
1)Product Specification and Steel Grade
Type | 3004 Aluminum Coil |
1000 Series | 1050 1060 1070 1100 |
2000 Series | 2024(2A12), LY12, LY11, 2A11, 2A14(LD10), 2017, 2A17 |
3000 Series | 3A21, 3003, 3103, 3004, 3005, 3105 |
4000 Series | 4A03, 4A11, 4A13, 4A17, 4004, 4032, 4043, 4043A, 4047, 4047A |
5000 Series | 5052, 5083, 5754, 5005, 5086,5182 |
6000 Series | 6063, 6061, 6060, 6351, 6070, 6181, 6082, 6A02 |
7000 Series | 7075,7050,7A04,7472,7475 |
Thickness(mm) | 0.2 ~ 6.0 mm |
Width(mm) | 600 ~ 2,600 mm |
Surface | Wire drawing, oxidation, Mirror surface, Embossing etc |
Temper | H111 H112 H116/H321 H12/H22/H32 H14/H24/H34/H16/H26/H36 H18/H28/H38 H11. |
MOQ | 5ton, We can accept sample orders. |
Delivery port | Shanghai, Tianjin, Qingdao, Ningbo, Guangzhou, etc. |
Packaging Detail | Standard export packaging, various transportation, according to customer needs |
2)Chemical Composition
Alloy | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Others: | Others: | Al: Min. |
Each | Total | ||||||||||
1050 | 0.25 | 0.4 | 0.05 | 0.05 | 0.05 | - | 0.05 | 0.03 | 0.03 | - | 99.5 |
1060 | 0.25 | 0.35 | 0.05 | 0.03 | 0.03 | - | 0.05 | 0.03 | 0.03 | - | 99.6 |
1100 | 0.95 Si + Fe | 0.05~0.20 | 0.05 | - | - | 0.1 | - | 0.05 | 0.15 | 99 | |
3003 | 0.6 | 0.7 | 0.05~0.20 | 1.0~1.5 | - | - | 0.1 | - | 0.05 | 0.15 | remainder |
3004 | 0.3 | 0.7 | 0.25 | 1.0~1.5 | 0.8~1.3 | - | 0.25 | - | 0.05 | 0.15 | remainder |
3005 | 0.6 | 0.7 | 0.3 | 1.0~1.5 | 0.2~0.6 | 0.1 | 0.25 | 0.1 | 0.05 | 0.15 | remainder |
5005 | 0.3 | 0.7 | 0.2 | 0.2 | 0.5~1.1 | 0.1 | 0.25 | - | 0.05 | 0.15 | remainder |
5052 | 0.25 | 0.4 | 0.1 | 0.1 | 2.2~2.8 | 0.15~0.35 | 0.1 | - | 0.05 | 0.15 | remainder |
5754 | 0.4 | 0.4 | 0.1 | 0.5 | 2.6~3.6 | 0.3 | 0.2 | 0.15 | 0.05 | 0.15 | remainder |
5083 | 0.4 | 0.4 | 0.1 | 0.4~1.0 | 4.0~4.9 | 0.05~0.25 | 0.25 | 0.15 | 0.05 | 0.15 | remainder |
Aluminum Coil Workshop:
Shanghai Walmay Metal Group has sixteen casting and rolling production lines, three cold rolling mills, eighteen annealing furnaces with a capacity of 40 tons, and three aluminum plate flattening and finishing equipment.
3004 aluminum alloy coil Chemical Composition:Manganese (Mn): 1.0-1.5%;Magnesium (Mg): 0.8-1.3%;Iron (Fe): 0.7%;Silicon (Si): 0.3%;Copper (Cu): 0.25%;Zinc (Zn): 0.25%;Others (each): 0.05%;Others (total): 0.15%;Aluminum (Al): Remaining balance.
Aluminum Coil Application:
3004 aluminum alloy coil is commonly used to produce the body of
cans, the light components.
3004 aluminum alloy coil can also be used for the processing and
storage equipment of chemical products, sheet processing, some
construction tools, etc.
Architectural Applications: A 3004 aluminum alloy coil can be used
for roofing, siding, and other architectural components.
Chemical Equipment: A 3004 aluminum alloy coil is employed in the
construction of chemical equipment that requires resistance to
corrosion.
Aluminum Coil Package:
standard export package to protect the goods or customer's requirement.
FAQ
Q1. Where is your factory?
A1: Our company’s processing center is located in Wuxi, Jiangsu, China. It is well equipped with kinds of machines, such as laser
cutting machine, mirror polishing machine and so on. We can provide
a wide range of personalized services according to the customers’
needs.
Q2. What are your company's main products?
A2: Our main products are stainless steel plate/sheet, coil,
round/square pipe, bar, channel, etc.
Q3. How do you control quality?
A3: Mill Test Certification is supplied with shipment, Third Party
Inspection is available.
Q4. What are the advantages of your company?
A4: We have many professionals, technical personnel, more
competitive prices, and better after-sale service than other
stainless steel companies.
Q5. How many countries have you already exported?
A5: Exported to more than 50 countries mainly from America, Russia,
UK, Kuwait, Egypt, Turkey, Jordan, India, etc.
Q6. Can you provide a sample?
A6: Small samples in store and can provide the samples for free.
Customized samples will take about 5-7 days.