DIN975 HDG Metric Threaded Rod Large Fastening Force Length 1000mm - 4000mm

DIN975 M10 HDG Fully Threaded Rod Large Fastening Force Length 1000mm-4000mm

Product Description:

The threaded rod for construction, ceiling connect, usually connect nuts and washer are used.

Threaded rod is head, the whole product is thread. A threaded rod, also known as a stud, is a relatively long rod that is threaded on both ends; the thread may extend along the complete length of the rod. They are designed to be used in tension. A threaded rod, also called a stud bolt , is a relatively long rod that is threaded on both ends; the thread may extend along the complete length of the rod. They are designed to be used in tension. Threaded rod in bar stock form is often called all-thread. Material: carbon steel 4.8, carbon steel 8.8, 10.9 , 12.9 High Strength Zinc Plated Metric Full Threaded Rod

Specification:

1. Material: Low Carbon steel, Mild Carbon steel, Stainless steel
2. Dimension: M3-M52, 3/16-24---2”
3. Length: General (1000mm-4000mm ), we also can produce according to your requirement
4. Coating: Plain, Black, Zinc Plated, HDG
5. Packing: Nylon bag, bundle ,pallet
6. Standard: DIN976/DIN975, ASTM/UNC
7. Grade: 4.8, 5.8, 6.8, 8.8, B7, 10.9

8. Product: DIN975 M10 HDG Fully Threaded Rod Large Fastening Force Length 1000mm-4000mm

9. Payment: L/C,T/T

10. Port: Shanghai,  Ningbo

Threaded rod in bar stock form is often called all-thread.Main standard :DIN975 DIN976

All thread rod, commonly referred to as fully threaded rod, redi-rod, continuously threaded rod, TFL rod, and abbreviated ATR is used for general purpose fastening for anything from an anchor bolt to a through bolt. A variety of grades and materials are available. Available material : 304 / 316 A2 / A4 Stainless Steel , one type of fastener DIN976

Full Threaded Rod or Double end bolts . For studs that are not completely threaded, there are two types of studs: full-bodied studs, and undercut studs. Full-bodied studs have a shank equal to the diameter of the thread. For studs that are not completely threaded, there are two types of studs: full-bodied studs, and undercut studs. Full threaded rods have a shank equal to the diameter of the thread. Studs have a shank equal to the pitch of the screw thread. Undercut studs are designed to better distribute axial . In a full-bodied stud the stresses are greater in the threads than in the shank Also called threaded rod , thread rod , thread bar , threaded bar . Cut threads are entirely suitable for many applications, even when rolled threads might be slightly stronger. Mass-produced fasteners (standard bolts and studs) are usually rolled, but add parts with custom features and small lot sizes are likely to be cut.

Application:

DIN975 M10 HDG Fully Threaded Rod Large Fastening Force Length 1000mm-4000mmare generally used in machinery, communications equipment, electronic equipment, metal lighting, building bridges and other related industries. Threaded rods are supplied in strict accordance with national and international manufacturing standards and provide nationally recognized third-party testing to ensure the provision of suitable and safe fastener products.

The threaded rod for construction, ceiling connect, usually connect nuts and washer are used.

Advantages:

1: We can produce different standard following different customers’ requirement

2: We have some stock in our warehouse

3: More then 10years experience

4: Factory direct price and on time delivery