60 MM Square Solid Tube Straight With Idler Hub Trailer Axle
2500-3500 Kg
BOLT PATTERN
Use the distance between the center of one bolt hole to the center
of the bolt hole adjacent to it:
If the distance is:
2-5/8" - the bolt pattern is 5 on 4-1/2
2-3/4" - the bolt pattern is 5 on 4-3/4
3" - the bolt pattern is 5 on 5
3-1/4" - the bolt pattern is 5 on 5-1/2
Hub Face (HF):
measure from one end of the axle where the lug bolts protrude out
from to the other end at the same point. This is the Hub Face.
6*5.5", 8*6.5" wheel pattern | NO. | Description | QTY | option 1 | option 2 | option 3 | 1 | axle shaft | 1 | 50mm Rd / Sq solid | 60mm Rd / Sq solid | 76*6mm round tube | 2 | Oil seal | 2 | AC00200400 | AT01700302 | | 3 | inner bearing | 2 | 25580/20 | | | 4 | ilder hub | 2 | AT01700112 | AT01700112A | | 5 | wheel nut | 12,16 | 1/2"-10UNF | | | 6 | outer bearing | 2 | 15123/45 | 14125A/76 | | 7 | flat washer | 2 | AC00201001 | | | 8 | castle nut | 2 | AC00200701 | | | 9 | split pin | 2 | AC00200404 | | | 10 | dust cap | 2 | AC00200601 | AC00200601B | |
|
![](http://img.everychina.com/nimg/82/44/17840a6476d968dedc964989f67c.jpg)
![](http://img.everychina.com/nimg/fe/84/8ac01d5b97560129053005e97697.jpg)
FAQ:
1: Could you please make us an offer as soon as possible?
In order to get the price quickly and accurately, please provide
the technical drawing or OE number, we will be very grateful.
2: How can you guarantee the quality of your products?
Our products have passed ISO9001 international quality standard
certification. Our company has a very strict quality control
system.
3: How to solve the problems in the later stage?
We are confident in our products. We pack them well to make sure
they are well protected.
Packaging & Shipping
As for the transportation of products, our company supports various
sea, land and air international transportation. Please confirm the
specific transportation plan during the negotiation.
In trailers, the parking brake, also called hand brake, emergency
brake, or e-brake, is a latching brake usually used to keep the
vehicle stationary. It is sometimes also used to prevent a vehicle
from rolling when the operator needs both feet to operate the
clutch and throttle pedals. Automobile hand brakes usually consist
of a cable directly connected to the brake mechanism on one end and
to a lever or pedal at the driver's position. The mechanism is
often a hand-operated lever (hence the hand brake name), on the
floor on either side of the driver, or a pull handle located below
and near the steering wheel column, or a (foot-operated) pedal
located far apart from the other pedals.