What is an air suspension struts?
The main difference between a traditional shock or strut is that they have a dampening mechanism set to a certain ride control feel while an air suspension system uses an air compressor in combination with air struts and suspension air bags to control the feel of the ride. Air suspension has several advantages over traditional shocks and struts. The first is that the ride quality is often controlled by the driver of the vehicle. Therefore, if you want a softer ride you can set your air suspension system to deliver that and vice versa if you are looking for a stiffer, rougher ride. The second advantage is that you can control ride height, some systems are advanced in that they automatically control this for you. The final advantage of an air suspension system is weight management. If you load the back of your SUV with a large amount of groceries from the store, the air suspension system either automatically adjusts to handle it or you can manually adjust it. For traditional shocks and struts the level of rebound is set and therefore no matter what the weight of your load is, you have to stick with it. This often creates a sagging rear end when carrying a heavy load.

While an air suspension system is more complex, the advantages are clear. The system is comprised of a central air suspension compressor as well as air struts within an air bag at each wheel. The air compressor pressurised the air struts as needed to control the feel. Other components can be seen in the diagram above, all of which are mainly air lines to transfer pressure and driers (filter) to complete the system.

Valves

Valves on OEM air suspensions are computer-controlled to move air around the system as the computer deems necessary. A solenoid valve can be electrically opened or closed to allow or restrict flow to certain parts of the system.

Air Suspension System Components
Early versions of air suspension systems were relatively simple. Air bags replaced the coil springs. The bag was inflated to the correct pressure or height with an outside compressor through a valve on the bag. Changes in technology and use added more components, and control, to the system. But today's air suspension systems all have a basic stock of similar components that vary little from maker to maker. The differences come mainly in controls and ease of installation.
Air bag material has changed little over time. The bag is a composite of rubber and polyurethane, which provides structural integrity, air-tight construction, toughness against light abrasion from road debris and sand, and resistance to salt and chemical corrosion.
The bags come in three basic shapes:
Double-convoluted bag. This bag is shaped like an hourglass. The design allows for a little more lateral flexibility than the other designs.
Tapered sleeve. This air bag performs the same as any other but is designed to fit in a tighter area and offers a little more adjustability on ride height.
Rolling sleeve. This is also a specific-application air bag. The pertinent differences between the two sleeves are really about ride height and spring control, and what's best for the vehicle and the application.
Most air suspension systems now come with an on-board compressor. The compressor is an electric pump feeding air to the bags through a series of compressed air lines. The compressor is generally mounted on the vehicle's frame, or in the trunk. The vast majority of compressors come with an attached drier. The compressor works by drawing outside air into the pump, compressing it and moving it to the bags. Outside air is often laden with moisture, and moisture can wreak havoc in a closed system. The drier uses a substance known as a desiccant to absorb as much moisture from the air as possible before the air is sent through the system.
Simpler compressor systems rely on the compressor itself to maintain, increase or decrease pressure. More advanced systems add an air tank to maintain pressure and provide an even transition between pressures. Compressors can be activated manually or automatically, and controlled solely by the driver, automatically through an electronic system, or a combination of both.

We possess:

1.  Long experience in air suspension industry;

2. Strong and reliable factory with stable supply capacity;

3. Various air suspension products, covering many car models;

4. Continuous new products development;

5. Professional sales team for every customer.

If you want long-term cooperation, you can also contact us to get our latest product catalogue and more information.