PP Exhaust Gas Cleaning System Scrubber Purification

Factory Price Gas Purification Tower Exhaust Gas Scrubber Cleaning Exhaust Air​

After the exhaust air of the paper machine is discharged into the atmosphere, it will form a "white fog" and "drizzle" phenomenon, especially when the temperature is low in winter. These exhaust air contains harmful components, and are highly corrosive, and will pollute the environment. Therefore, it is necessary to add a hood air exhaust defogging device for treatment to make it meet the environmental protection emission requirements.

Materials 

Stainless steel and  high temperature resistant PP material

Product features:

• Meet with environmental emission requirements

• No fog in winter

• Remove smell of air exhaust

• Good economy, treatment cost as low as RMB2.00/ton paper

Application

It is applicable to exhaust air treatment in paper-making, tobacco, steel and new energy industries

Working principle

The spray mixing tower integrates cold water spray and cold air mixing. The exhaust air enters from the bottom of the tower and flows upward through the gap of the folding baffle. The cold water atomizes through the nozzle and becomes numerous water droplets, which are sprayed on the exhaust air and the folding baffle. It carries out heat transfer and mass transfer with the wet and hot exhaust air to cool and condense the exhaust air. At the same time, the water droplets are heated and fall into the bottom drain outlet for discharge. The bottom enters the mixing section upward after two stages of spraying.

There are air inlets on both sides of the mixing section. Fresh air is pumped into the tower and fully mixed with the exhaust air. After heat transfer and cooling, the exhaust air is condensed again. When it passes through the gap of the baffle plate, it is condensed and separated. The exhaust air and cold air are mixed twice and then cooled by a cold water spray, and finally discharged into the atmosphere by the exhaust fan.

Our services

Pre-sale service

1. Provide customization: With over 20 years of customization experience, we are able to customize the machine according to your requirements according to output, site area and structure.
2. Project planning and design service.
3. 24-hour online consulting service.

After-sales service

1. Provide 1 year complete warranty and maintenance service. Discount on spare parts purchase after one year.
2. 24-hour online guidance and commissioning service.
3. Provide training services.