Trucks Reverse Camera Blind Spot Monitoring System 3W Full Set

Vehicle Camera Monitoring System Full set of reverse camera blind spot monitoring for large trucks

(1) When watching at high speeds   operating this system may cause serious traffic accidents  To avoid accidents   please do not watch or operate this system when the speed exceeds 5 kilometers per hour
(2) This system is a parking assistance system that only provides information on blind spots and road conditions around the vehicle   There is a deviation between the panoramic diagram and the distance between the vehicle and the actual object   Drivers are advised to operate according to the actual situation
(3) Installing or disassembling the equipment of this system requires professional personnel    If there are any abnormal situations in the system   users should contact the installation service provider in a timely manner 
(4) During the installation process    the wiring should be extended along the edge of the car body   avoiding the high temperature zone at the front of the car to avoid damage to the wiring   [1]
Development history
Broadcast
edit
In December 2011    the 360 ° panoramic monitoring system was launched   and car owners began to know what a 360 ° panoramic monitoring system is
In February 2012   it was widely accepted by car owners and actively sought out 360 ° panoramic monitoring system agents and dealers to install it
In February 2013    the 360 ° panoramic monitoring system was updated and renamed as the 360 ° panoramic bird's - eye seamless monitoring system   with greater technological breakthroughs
Important events
Broadcast
edit
360 ° panoramic monitoring system display screen switching operation method
(1) Four screen :  When the car starts   the host and camera start to work   and the screen is in an H-shaped four split mode   displaying four screens :  "front"   "back"    "left"   and "right" (hereinafter referred to as the basic screen mode)    After a delay of 15 seconds   the display automatically turns off and switches to navigation and audio mode   but the entire system is still in recording mode 
(2) Front view :  In the basic graphics mode   the front camera works by using the film switch or lifting the steering lever upwards   The display screen displays the front view of the car separately   Press the film switch again or lift the steering lever upwards to turn off the display and switch to navigation and audio mode
(3) Rear view :  When reverse gear is engaged   the display automatically switches to the reverse view screen   which is the rear view display mode   If you exit reverse gear   turn off the rearview display mode and automatically enter the basic screen mode   After a delay of 15 seconds   the display will automatically turn off and switch to navigation and audio mode 
(4) Side view :  In the basic graphics mode   when turning on the left or right turn lights   the display screen switches to the left and right display modes   cancels the turn signal   and the screen automatically switches to the basic graphics mode   with a delay of 5 seconds to turn off the display and switch to navigation and audio mode

We are a professional manufacturer of research and development   production  and vehicle monitoring

Car video recorder  car camera    car usb camera   car display    usb camera

Please contact us by email :  firecore1688@163.com

WeChat and phone :  0086+13823606792