Industrial Polycarbonate Panel Greenhouse Uniform Illumination Good Air Tightness

PC Sheet Covering Material Industrial Polycarbonate Greenhouse

Product Description

Most of the PC panel greenhouses are Venlo type and dome structure, and few of them are solar greenhouses. PC panel greenhouse frame is generally assembled with bolt hot-dip galvanized light steel structure and sealed with special aluminum profile. The whole structure of the greenhouse frame is solid, resistant to wind and snow. The whole steel structure has a long service life and can withstand high temperature and high humidity environment. As a greenhouse covering material, PC solar panel not only has the advantages of good light transmittance, strong impact resistance, good heat preservation effect, strong environmental adaptability, light weight and so on. It also has the characteristics of simple construction, low maintenance cost and low transportation cost, which makes the overall cost of greenhouse lower. It's a kind of material to replace plastic film and glass in greenhouse.

Advantage

(1) Large ventilation area

The ratio of roof to floor of greenhouse with PC board is relatively high. Compared with other types of greenhouses of the same span, 2-4 pairs of roofs, i.e. 2-4 ridges and gutters, can be set for each span. The ventilation capacity of other greenhouses in the same span can be achieved by opening windows. When continuous window opening is adopted, the ventilation capacity will be doubled. Generally speaking, the ventilation area of the greenhouse with PC board can reach about 30% of the greenhouse area.

(2) Roof drainage efficiency is high

As the number of drains per span of PC plate greenhouse is 2-4, compared with other types of greenhouse, the catchment area per span of drains is also reduced by 50% - 83%.

(3) Flexible use

Application of truss roof truss. PC plate greenhouse has more flexibility. As the height of truss joist is 350-60m, it provides installation for entrepreneurial institutions, curtain systems, crop suspension systems and other equipment. Enough installation space and support position.

(4) Components are very versatile.

Because of the consistency of greenhouse roof units and the similarity of PC panel greenhouse node structure, it provides the greatest possibility for the standardization of components, thus reducing the characteristics of large changes and large quantities of components caused by different greenhouse spans. The production cost and management cost of greenhouse also provide greater convenience for after-sale service and maintenance of products.

(5) The height of greenhouse is low and the bearing capacity is strong.

As the height of the roof decreased, the overall height of the greenhouse decreased accordingly, without affecting the height of the indoor space of the greenhouse. Because the main structure of the greenhouse bears the wind load directly related to the height of the greenhouse, reducing the height of the greenhouse is actually equivalent to reducing the wind load of the greenhouse, that is, under the same conditions, improving the ability of PC board greenhouse to bear the wind load.