Active Member
|
[China]
Address: Shenze, Shijiazhuang City, Hebei Province, China
Contact name:Sherry
SIHNO MACHINERY LIMITED |
|
|
Factory price of half feeding rice combine harvester
1)This mini half feed rice combine harvester with track is mainly
composed of three parts: diesel engine, chassis and the harvester.
While the harvester part consists of the following devices and
institutions: cutting device, conveying device, threshing device,
the rear seat, operating mechanism,control mechanism, and the
hydraulic lifting mechanism, etc.
2)The mini rice combine harvester has wide applicability, is
suitable for mountainous area, hill, paddy field, terraced field,
mud field, small field.
1. So far the smallest, lightest weight, high performance,
multi-function half feeding type harvester.
2. Track style chassis, make the region land area is big, the
ground pressure is small, to walk in the mud tanaka freely;And road
surface adhesion is strong, can provide a driving force of the more
powerful
3. The machine is not less than 300 kg (including power), transport
convenient and flexible to use;Smaller, suitable for small plots of
land;Half way of feeding threshing, keep complete rice straw
4. Screw pump way, reduce the breakage rate;Innovation of flow type
cleaning device, greatly reduce the grain impurity rate;Increase
the lighting lamps, convenient operation at night
5.24 v voltage electric control, use left turn to the right to
browse forward and backward operation easier then, safe and
reliable
6. Give grain refers to the grain, improve the ability of harvest,
increase scope of harvest
7. Cutting length is 0.75 m, more efficient 800-1200 m2 / h
8. Apply to rice 70-140cm;Combined with electronic control cutting
machine lifting operation, adjust height of harvest
9. The unique on-off device, makes walking system and harvesting
system can be operated separately, more practical, more human
| Style | 4LBZ-75 |
| Dimension | 2400*900*1050mm |
| Weight | 300kg |
| Cutting width | 750mm |
| Institutional form | Half-feed self-walking |
| Feeding capacity | 0.3kg/s |
| Cutting efficiency | 0.8-1.2km/h |
| minimum clearance from ground | 235mm |
| Power | 178F diesel engine/5.4KW |
| Broken rate | Less than 2% |
| Trash rate | Less than 7% |
| Total lose rate | Less than 3% |
| Height of cutting(mm) | 700-1400 |
