Henan Lantian Medical Supplies Co.,Ltd. |
|
[test method] please put all reagents back to room temperature
before test. The test was carried out at room temperature.
Extraction of specimens (see Figure 1)
1. Add 400 in the sample extraction tube vertically μ L (about 10
drops) sample package, insert the sample test into the sample
extraction tube, rotate about 10 times relative to the inner wall,
and dissolve the sample in the solution. probably.
2. Screw the cotton stick head of the test tube along the inner
wall of the exhaust pipe, keep the liquid in the test tube as much
as possible, and remove the test tube and discard it.
3. Cover with droplets.
Test procedure (see Figure II)
1. Take out the test card from the sticker bag.
2. Use 2 drops (about 80 μ 50) The sample extract is processed in
the sample hole of the test card, and then the timer is activated.
3. Read the results of the test card after 15 minutes at room
temperature. Invalid read result after 20 minutes
The judgment diagram of the result of the test card shows the
following things.
Invalid ① result: there is no reaction production line in the
quality management production line (production line C), the test is
invalid and needs to be retested.
② Negative result: red ribbon, color indicates quality management
line (line C).
③ Positive results: two red bands, test line (T) and quality
control line (c).