Jiaxing Chenxi Hardware Co., Ltd. |
|
DN HEAD WITH RIGHT ANGLE CEILING CLIP DRIVE PINS POWDER ACTUATED FASTENER CONCRETE STEEL NAILS
1. Mechanical Properties
These DRIVE PINS are manufactured from C-1060 steel and austempered to a core
hardness of HRC 52 to 56.To insure ductility,these DRIVE PINS are bend tested during Quality Control inspection to
about 60 degrees.
2. Corrosion Resistance:
These DRIVE PINS are designed to be used in a non-corrosive
atmosphere unless application specific corrosion testing has been
performed.The standard for this DRIVE PINS is applied zinc meeting the international requirement
providing an average thickness of 5 micron(0.0002")with no
supplementary coating.
3. Shoot Test:
These DRIVE PINS received the acceptance inspection by shoot
with power actuated tool for penetrating A3 steel plate of 8mm
thickness.
MODEL | LENGTH | KG/100PCS |
DN27P8TC | 1" | 3.18 |
DN32P8TC | 1-1/4" | 3.22 |