Active Member
|
[China]
Contact name:Felix Liu(Mr.)
Jiangsu Gold Electrical Control Technology Co., Ltd. |
|
|
AC SSR Relay AC SSR of Horizontal Type Double LED Indicator
Specification of AC Single Phase SSR Solid State Relay
AC SSR Relay AC SSR of Horizontal Type Double LED Indicator
Main technical paramete Type | SAP4805D SAP4810D SAP4820D SAP4825D SAP4840D | SAP4850D SAP4860D SAP4880D SAP4890D SAP48100D | |||||||||
| Load voltage range | 40- 530VAC | ||||||||||
| Max Load current | 5A | 10A | 20A | 25A | 40A | 50A | 60A | 80A | 90A | 100A | |
| Isolation bet.In & out | Optical isolation ≥2500VAC 1min | ||||||||||
| Isolation to case | ≥2500VAC 1min | ||||||||||
| Control voltage range | 3-32VDC | ||||||||||
| Control current | 6- 20mA(20mA@ max input 32VDC) | ||||||||||
| Output | Zero switching | ||||||||||
| Turn-on voltage | ≤1.3VAC | ||||||||||
| Off-state leakage | ≤8mA | ||||||||||
| Off-state dv/dt | 300v/μs | 500v/μs | |||||||||
| On or off time | 10ms @ 50Hz | ||||||||||
| Frequenty range | 47/63Hz | ||||||||||
| Status indicator | LED | ||||||||||
| Operating temperature | -50~ 80℃ | ||||||||||
| Internal actual device | 12A | 16A | 24A | 41A | 50A | 60A | 80A | 90A | 100A | 120A | |
| Applications | Electric heating, Plastic machinery, Automation and control, etc. | ||||||||||
AC SSR of Horizontal Type Double LED Indicator
Main technical paramete Type | SAP4805D-L SAP4810D-L SAP4820D-L SAP4825D-L SAP4840D-L | SAP4850D-L SAP4860D-L SAP4880D-L SAP4890D-L SAP48100D-L | |||||||||
| Load voltage range | 40- 530VAC | ||||||||||
| Max Load current | 5A | 10A | 20A | 25A | 40A | 50A | 60A | 80A | 90A | 100A | |
| Isolation bet.In & out | Optical isolation ≥2500VAC 1min | ||||||||||
| Isolation to case | ≥2500VAC 1min | ||||||||||
| Control voltage range | 3-32VDC | ||||||||||
| Control current | 6- 20mA(20mA@ max input 32VDC) | ||||||||||
| Output | BCR, Zero switching | Two SCR inverse parallel, Zero switching | |||||||||
| Turn-on voltage | ≤1.3VAC | ||||||||||
| Off-state leakage | ≤8mA | ||||||||||
| Off-state dv/dt | 300v/μs | 500v/μs | |||||||||
| On or off time | 10ms @ 50Hz | ||||||||||
| Frequenty range | 47/63Hz | ||||||||||
| Status indicator | In LED and out on LED | ||||||||||
| Operating temperature | -50~ 80℃ | ||||||||||
| Internal actual device | 12A | 16A | 24A | 41A | 50A | 60A | 80A | 90A | 100A | 120A | |
| Applications | Electric heating, Plastic machinery, Glass equipment, etc. | ||||||||||
There are two main areas of the solid state relay:
SSR input: There are a number of aspects of the input circuit to
consider as the input LED needs to operate under the required input
conditions:
Input drive level: The input circuit needs to ensure that the
optical transmitter, i.e. LED is able to operate wit the specified
drive level. This normally requires the inclusion of a current
limiting resistor and any other electronic components to ensure the
LED lights sufficiently with the incoming signal. Solid state
relays are available that operate with input voltages of anywhere
from a few volts upwards.
DC or AC input: If the SSR is intended for operation with a DC
input then it can operate with a minimum of additional electronic
components - possibly just a current limiting resistor. If AC
operation is intended, then a rectifier and normally a bridge
rectifier is used to rectify the input signal so that the LED is
only driven with a signal of the correct polarity. The LED light
will pulse with the alternating waveform - twice the frequency if a
bridge rectifier is used. This bridge rectifier can be incorporated
as part of the solid state relay, or possibly added externally.
SSR output: The output side of the solid state relay also requires
understanding as there can be a number of additional electronic
components beyond the basic photo-sensitive switching device.
A variety of different devices can be used for the output of solid state relays: transistors, thyristors / SCRs, MOSFETs and triacs. The device type determines many of the characteristics of the SSR.
If the output is a single transistor, FET or thyristor / SCR then this means that this SSR can only conduct in one direction and can only be used for controlling DC loads. A triac or two thyristors / SCRs in the output are generally required for AC operation - paired MOSFETs are also sometimes used.
The specified maximum output ranges for solid state relays can range from a few volts up to hundreds of volts AC or DC and the current levels that can be carried can be up to tens or even hundreds of amps according tot he specification of the particular device.
Our Company
Founded in 1992, Wuxi Gold Control Technology Co., Ltd., a private high tech company, is specialized in the research and production of Solid State Relays, Electronic Semiconductors, DC Motor Drivers and AC Voltage Regulation Devices.
For the past 10 consecutive years, our company has been qualified as "Jiangsu's private high tech business". We have also been given the honor as "Wuxi's 10 Best Private Science & Technology Enterprises" for years.
Our products, the electronic modules with the brand of Gold, have been listed among "Wuxi's Renowned Products".Our company has 5 patents on Solid State Relays. Our products are widely used in various industrial automation control areas like chemical fiber machinery, temperature control of electric furnace, rubber & plastic machinery, fountain control and digital-controlled machinery, and are sold to Europe, America, Korea and Turkey.
Our Factory
Our factory can produce about 50,000 pieces each month. We can give you good quality and reasonable prices. We have 20 professional research people who have all been graduated from famous universities and colleges. When producing, we have strict tests: self-test, inter-test and special-test.
Our Certificate
Our products, the electronic modules with the brand of Gold, have been listed among "Wuxi's Renowned Products".Our company has 5 patents on Solid State Relays. Our products are widely used in various industrial automation control areas like chemical fiber machinery, temperature control of electric furnace, rubber & plastic machinery, fountain control and digital-controlled machinery, and are sold to Europe, America, Korea and Turkey.
Our company passed the Certification of ISO9001:2000 in 2000. Our main products have been given CE Certificate of European Union, UL,CUL and RoHS Certificates.
