Home Companies SUZHOU FOBERRIA NEW ENERGY TECHNOLOGY CO.,LTD.

Rechargeable sealed lead acid battery 12V 200Ah For Solar Storage UPS

Active Member

Contact Us

[China]

Address: No.188 Chunxu Road ,Economic Development Zon, Kunshan City, Suzhou, Jiangsu Province, China.

Contact name:Roger Ning

SUZHOU FOBERRIA NEW ENERGY TECHNOLOGY CO.,LTD.

Rechargeable sealed lead acid battery 12V 200Ah For Solar Storage UPS

Country/Region	china
City & Province	suzhou jiangsu
Categories	Batteries

Product Details

Rechargeable sealed lead acid battery 12V 200Ah For Solar Storage UPS

> Main Features

1.Maintenance free rechargeable sealed lead acid battery

As it is valve-regulated sealed lead acid battery.sealed and glass mat is used .acid is trapped inside.

so refilling is not needed and is leak proof.

2.ABS material: increase the strength of battery container. (Flame-retardant ABS is optional);

3.High quality AGM separator: extend cycle life and prevent micro short circuit.

4.PbCaSn alloy for plate grids: less gassing, less self-discharging.

5. Low self discharge

The self –discharge rate for FOBERRIA Sealed Lead Acid Battery is about 2-3% per month at room.

temperature compared with 20-30% for other common battery systems.

6. Longer service life

Used thick and massive calcium grate ensure that FOBERRIA battery has a longer service life over 10years.

7. High discharge rate

Since the internal resistance is low .the battery can provide high rate of discharge.

8. Wide operation temperature range

VRLA Rechargeable Sealed Lead Acid Battery capacity is rated at 25°C, and will operate from 15°C +50°C when it is fly charged Ambient temperature is 25°C.Service life will be more efficient under 15’C to 25”C .

9.Silver-coated copper terminals (T1, T2 terminal), brass insert terminals and lead terminals improve the electric conductivity.

> Specification

Battery Model No.		FBR12-200
Nominal Voltage		12V
Capacity	20HR(5.25V)	200Ah
(25ºC)	10HR(5.25V)	176Ah
	1HR(4.80V)	124Ah
Dimension	Length	522±2mm
	Width	238±2mm
	Height	218±2mm
	Total height	221±2mm
Approx. Weight		59.5kg±4%
Terminal type		F13
Internal resistance(Fully charged,25ºC)		Approx 3.5mΩ
Capacity affected by	40ºC	102%
Temperature(20HR)	25ºC	100%
	0ºC	85%
	-15ºC	65%
Self-discharge(25ºC)	3month	Remaining Capacity:91%
	6month	Remaining Capacity:82%
	12month	Remaining Capacity:65%
Nominal operating temperature		25ºC±3ºC(77ºF±5ºF)
Operating	Discharge	-15ºC-50ºC(5ºF-122ºF)
temperature range	Charge	-10ºC-50ºC(14ºF-122ºF)
	Storage	-20ºC-50ºC(-4ºF-122ºF)
Float charging voltage (25ºC)		13.5 to 13.8V Temperature compensation:-18mV/ºC
Float charging voltage (25ºC)		13.5 to 13.8V Temperature compensation:-18mV/ºC
Cyclic charging voltage (25ºC)		14.5 to 15V Temperature compensation:-30mV/ºC
Cyclic charging voltage (25ºC)		14.5 to 15V Temperature compensation:-30mV/ºC
Max charging current		60A
Max discharging current		1600A(5sec.)
Designed floating life(20ºC)		10years

> Structure and composition

Component	Positive plate	Negative plate	Container	Cover	Separator	Electrolyte	Safety valve	Terminal
Raw material	Lead dioxide	Lead	ABS	ABS	AGM	Sulfuric acid	Rubber	Copper

> Application

1. Solar power system(off-grid solar power system, solar street light system, solar garden light system);

2. Wind Power System;

3. UPS and computer backup power;

4. telecommunication system;

5. Power station System;

6. Railway System;

7. Emergency lighting system;

8. Automatic control system;

9. Alarm system for fire protection, security.

>Constant Current Discharge Characteristics(A,25ºC)

F.V/Time	5min	10min	15min	30min	60min	2h	3h	4h	5h	10h	20h
3.20V	17.2	10.9	8.51	4.79	2.95	1.61	1.12	0.92	0.78	0.43	0.228
3.30V	16.7	10.6	8.3	4.7	2.9	1.6	1.11	0.92	0.78	0.42	0.227
3.40V	16	10.13	7.99	4.55	2.83	1.59	1.1	0.91	0.77	0.42	0.226
3.50V	15.3	9.69	7.72	4.44	2.77	1.56	1.09	0.9	0.77	0.42	0.225
3.60V	14.4	9.15	7.31	4.28	2.69	1.52	1.06	0.88	0.75	0.41	0.221

>Constant Power Discharge Characteristics(Watt,25ºC)

F.V/Time	5min	10min	15min	30min	60min	2h	3h	4h	5h	10h	20h
3.20V	63.9	40.9	32.3	18.3	11.4	6.29	4.42	3.66	3.12	1.7	0.91
3.30V	62	39.7	31.5	17.9	11.2	6.25	4.39	3.64	3.11	1.7	0.91
3.40V	59.5	38.1	30.4	17.4	10.9	6.2	4.36	3.62	3.08	1.69	0.91
3.50V	56.9	36.4	29.3	17	10.7	6.1	4.33	3.59	3.06	1.68	0.9
3.60V	53.7	34.4	27.8	16.3	10.4	5.95	4.2	3.48	2.97	1.65	0.88

>Discharge diagram

>Workshop scene

Q1: How to choose the right battery?

A1: Tell us your demand, then our sales will recommend a suitable battery for you.

Q2. Do you have any MOQ limit?

A2: Yes, we have MOQ for mass production, it depends on the different model numbers. 50-500pcs sample order is available.

for sample checking is available.

Q3. Is it OK to print my logo on the product?

A3: Yes. Please inform us formally before our production and confirm the design firstly based on our sample.

Q4. Why battery has different capacity at different hour rate?

A4: The capacity of a battery, in Ahs, is a dynamic number that is dependent on the discharge current. For example,

a battery that is discharged at 10A will give you more capacity than a battery that is discharged at 100A. With the 20-hr rate,

the battery is able to deliver more Ahs than with the 2-hr rate because the 20-hr rate uses a lower discharge current than the 2-hr rate.

Q5. Are you a battery manufacturer, and do you produce the plate by yourself ?

A5: Yes, we are a professional battery manufacture in Fujian Province, China. And we produce plates by ourselves.

Q6. How to proceed with an order?

A6. Firstly let us know your requirements or application. Secondly, We quote according to your requirements or our suggestions.

Thirdly customer confirms the samples and places a deposit for formal order.

Fourthly We arrange the production.