Home Companies ShenZhen Vector Technology Co., Ltd.

1.5kw 130mm AC Servo System For Packing machine

Active Member

Contact Us

[China]

Address: Building 13, Maker Town, Liuxian Avenue, Nanshan District, Shenzhen

Contact name:Roc Chow

ShenZhen Vector Technology Co., Ltd.

1.5kw 130mm AC Servo System For Packing machine

Country/Region	china
City & Province	shenzhen

Product Details

2500rpm 6n. M 1.5kw 130mm AC Servo Motor System With Factory Price

Voltage	Control Mode	Single-phase / three-phase full-controlled rectification SVPWM modulation
Encoder	Encoder Feedback	2500 pulse incremental + Hall encoder; 2500 pulse incremental; 17bit Tamagawa absolute encoder; 23bit Tamagawa absolute encoder; 24bit Nikon absolute encoder;
Pulse Command Input	Pulse Type	Differential input,Open collector
	Frequency Range	Differential input:0-500kHz,pulse width greater than 1us Open collector: 0-300kHz,pulse width greater than 2.5us
	Pulse Mode	pulse + direction; AB pluses; CW+CCW;
Analog Input	Voltage Range	-10V to 10V
	Input Impedance	10kΩ
	Maximum Frequency	1.5kHz
DI/DO Interface Type		NPN/PNP
Communication		Modbus/CANopen/EtherCAT

Products Description

Product Name	2AC Servo Motor System With Factory Price
Brand	Vector
Model No.	VEC-VC1-00623M-M-E
Power	1.5KW
Input/Output	Pulse/Analog
Voltage	220V
Phase	Single/Three Phase
Rated Current	6A
Communication Protocols	CanOpen / EtherCAT / Modbus
Encoder	17 / 23 bit absolute encoder;

Installation:

● Install the driver on a dry and sturdy platform. Maintain good ventilation and

heat dissipation during installation and maintain good grounding.

● Please install in the specified direction to avoid malfunction.

● When installing, please ensure that the servo driver is kept at a specified

distance from the inner surface of the cabinet and other machines, otherwise it may cause fire or malfunction.

● When installing, do not block the suction and exhaust ports, and do not allow foreign objects inside the

product to enter, otherwise it may cause malfunction or fire due to aging of internal components.

● Do not place heavy objects on or under this product as this may result in injury.

● Please install in the following environment:

1.places without direct sunlight;

2.Locations where the ambient temperature is in the range of 0 ° C to 55 ° C;

3.Relative humidity in the range of 0% to 95%, and no condensation;

4.Locations free of water droplets, vapors, dust and oily dust;

5.Locations where there is no high heat device;

6.Non-corrosive, flammable gas and liquid sites;

7.It is not easy to splash water, oil and medicine;

8.places that are not exposed to radioactive radiation;

9.Strong and vibration-free places;

10.Locations where there is no electromagnetic noise interference.

Installation Environment Requirements	Atmospheric Pressure	86~106kPa
	Mbient Humidity	0~55℃
	Ambient Temperature	0~90%RH
	IP Rating	IP20
	Vibration	0~4.9m/s^2

Maintenance and inspection Precautions
● do not change the wiring while the power is on, otherwise it may cause electric shock or injury.
● please perform wiring or inspection by professional technicians, otherwise it
may cause electric shock or product failure.
● please check the power after the power is off for at least 5 minutes. Even if the power is turned off,
high voltage may remain inside the servo drive. Therefore, do not touch the power terminal within 5 minutes
after the power is turned off, otherwise it may cause electric shock.
●when replacing the servo drive, please back up the servo driver user parameters to be replaced before the
replacement, and transfer the backup to the new servo drive, and then restart the operation, otherwise the
machine may be damaged.

Other Questions:
Q1. How to select the suitable model?
A: Please confirm your requirements for Rated Power, Current, Voltage,
Torque and select the suitable model based our model list;
Q2. How to set the programming system?
A: Our Servo drive support the Global Communication protocols: Modbus/CANopen/EtherCAT,
Please Just make the programming follow your experiences;

Certificates
1. CE (EU Safety Standard);
2. IEC/EN61800-5-1:2007 (Safety requirements for electrical, thermal and energy in Section 5-1 of the
variable speed electric driver system), corresponding to the national standard GB12668.501-2013;
3, IEC / EN61800-3: 2004 + A1 (speed control electric driver system part 3 electromagnetic compatibility
standards and its specific test methods), corresponding to the national standard GB12668.3-2012.

Quality Checking:
Four times Production testing
Two Times 24 hoursTesting
100% Inspection Before Shipping

Delivery Time and Shipping Way

1. For small order we always can delivery out within 1 week.
2. Our products can be shippied via Air, Land or Sea.