Results forac220v furniture pressure testerfrom 6657 Products.
|
IEC 60884-1 300N Plug Socket Tester Compression Test Device HC9902 Introduction of the Plug Socket Tester Comply with standards: GB2099-1-2008 Clauses 10.1 and 24.5 and Figure 8, ...
|
|
|
|
Coupling Implement Shell Pressure Test Device Product Information: This device is according to the IEC60320-1 standard requirement to design. Appliance inlets designed for surface ...
|
|
|
|
Oxygen Bomb (Air Bomb) Aging Tester HJ0606 Description: This device is used to process the aging test for the electric wire, the insulation layer and sheath of the rubber( plastic, ...
|
|
|
|
230 - 240N Plug Socket Tester Apparatus For Mechanical Strength Test On Resilient Covers Standard description: 9.3.1 Conformity shall be checked by the following test (an example ...
|
|
|
|
IEC 60884-1 Fig8 Plug Socket Tester Compression Testing Machine With 2PCS 150N Weights IEC60884-1 Clause 24.5 The specimens are subjected to a compression test as shown in figure 8...
|
|
|
|
IEC60335-1 Testing Equipment Pressure Test Device for Ceramic With 20MPa Test Pressure 100KPa/s Rise Rate Standard of IEC60335-1 Testing Equipment: IEC 60335-1:2020 Household and ...
|
|
|
|
IP Testing Equipment IPX8 Pressure Tank For Water Immersion Test With Stainless Steel Tank Body Product Introduction for IP Testing Equipment This is IPX8 Water Tightness Pressure ...
|
|
|
|
IEC60335-1 Ceramic Material Fuchsine And Methylated Spirit Pressure Test Apparatus Description The test apparatus is designed and manufactured according to general requirements of ...
|
|
|
|
IEC60884-1 Figure 44 Apparatus For Pressure Test At High Temperature for Pin With Insulating Sleeves Standard of Apparatus For Pressure Test At High Temperature: IEC 60884-1:2022 ...
|
|
|
|
IEC60884 Clause 10.1 300N Plug Compression Mechanical Strength Test Equipment Product information: The specimens are subjected to a compression test as shown in figure 8, the ...
|
|
|
|
Ball Pressure Test Apparatus Test Non-metallic Materials Product details: The HT Ball Pressure Tester conforms to many standard requirements like IEC60884-1, IEC60950 and so on. It ...
|
|
|
|
Ceramic Material Fuchsin Methylated Spirit Solution Pressure Test Equipment 15MPa This test apparatus is design and manufactured according to standard IEC 60335-1 clause 22.32, GB ...
|
|
|
|
Fluorescent Lamp Holder Axial Force Tester Product information: The test equipment is designed and manufactured according to IEC60598-1 clause 4.4.4 standard test item requirements...
|
|
|
|
IEC60811 - 1 - 2 Oxygen Bomb Aging Tester IEC Test Equipment For Wire And Cable Standard: IEC60811-1-2, IEC60335-1, IEC60335-2-17 IEC60245-2, etc. Application: This oxygen bomb ...
|
|
|
|
Ceramic Material Fuchsine And Methylated Spirit Pressure Test Apparatus HJ0607 Description: This device is used to check whether the ceramic material is tightly sintered. Confirm ...
|
|
|
|
IEC60529 Figure 5 Handheld Brass Spray Nozzle Tester For IPX3 IPX4 121 Holes Product Introduction The HT IPX3/4 Spray Nozzle is a hand-held test device to verify protection against ...
|
|
|
|
IEC60884-1 Ingress Protection Test Equipment Handheld Spray Nozzle Tester IPX3 and IPX4 Conditions when using the spray nozzle: Test for second characteristic numeral 3 with spray ...
|
|
|
|
Power Cord Strain and Twist Tester Product information: The test appliance conforms to IEC60335-1:25.15. It is used to test the power cord tension and torque at the terminal two ...
|
|
|
|
ISO4532 HPL Tester For Resistance To Impact By Small-Diameter Ball With Energy 0 ~ 90 N / CM Standard: GB / T7911-2013 Clause 7.3.8 Figures 6 and 7, ISO4532, DIN ISO4532 (DIN51 155...
|
|
|
|
Foam Horizontal Burning Tester Products Introduction This test apparatus is designed and manufactured according to the standard and related requirement of ISO9772-2001, UL94. This ...
|
|
|
You may also be interested in :