Active Member
|
[China]
Address: room1210,YangPu Technology Building,Unit2,2005 HuangXing road, Shanghai 200090,P.R.China
Contact name:Mr. Jiang
Shanghai Songming Consignation Equipment Co., Ltd |
|
|
UK Internal Primer Hdf Molded Door Panels Hollow Core No Shrink No Split
Molded Door Panels Introduction
1). Each section panel's joint is adopt "Finger-protection"(Pinch-resistant) safety Design in order to avoid any finger injury when door open and close. The panel is injected with polyurethane foam(CFC FREE). Foam density is 40kg/m3 All the panels are produced by continued production line which provide the stable quality.
2). Special design of pinch-resistant, there is continued folding part along the panel,thus the panel can be cut at any size,the hinges can be installed accurately and firmly.
3). Wood-grain or stucco Texture surface increases intensity and gives better appearance
4). Thickness of the panel:40mm with the 0.326mm,0.40mm and 0.45mm
5). Max.width of the panel:11800mm
6). Section height: any size between 44-55cm
7) .40mm panel heat consumption factor:K=1.0W/m2k Heat consumption factor of the installed door:K=1.6W/m2k
8). standard and special colors for the selection
Molded Door Panels Application
A modern and contemporary interior door complete with door jamb or
architraves.
2 / 4/ 6 panel with a smooth or textured effect
Quality moulded panel facings
Primed base coated faces
Wide range of sizes available
Suitable for painting
Molded Door Panels Main Features
1) Easy in installation and maintation.
2) Green, health.
3) No shrink, no split, great compatibility.
4) Primer can be painted to match your inside design.
5) Ready to customize and paint.
Door inner structure
1. Rail&Stile: white pine wood
2. Surface: 3mm HDF panles
3. Inside filling: honeycomb paper.
Remark: the surface can be smooth or wood grain
