We offer cast basalt tile lined pipes for coal bunkers and chutes.
These cast basalt tiles are bedded as well as jointed in
cement/special bonding agents like resins depending upon
application. These tiles mostly find application in automotive
industry and are designed to provide long-lasting lining and
enhancement to involved operational life cycle for both plant as
well as equipment.
Cast basalt lined pipes is a mineral material produced by melting
natural basalt at a temperature of approximately 1300°C, followed
by casting into moulds. This contributes to its superb physical and
chemical properties.
Data of cast basalt tiles
Chemical component
SiO2 | Al2O3 | Fe2O3 | TiO2 | CaO | MgO | K2O | Na2O | FeO | P2O5 | MnO |
---|
42-45% | 13-16% | 13-14% | 0.022 | 10-12% | 10-11% | 0.045 | 0.045 | 13-14% | <1% | <1% |
Physical property
NO. | ITEM | PERFORMANCE VALVE |
---|
1 | Specific gravity | 2.9-3.05gm/cc |
2 | Compressive strength | 3000-4500kg per sq cm(min) |
3 | Bending strength | 300kg per sq cm(min) |
4 | Water Absorption | 0 |
5 | Solubility in Acids | 0.006 |
6 | Hardness | 8(MIN.)Moh Scale |
7 | Modules of elasticity | 11.1×104N/mm2 |
8 | Expansion coefficient (room temperature to 60°C) | 0.75×10-5/K |
9 | Thermal Conductivity | 1.15W/mk |
10 | Special Heat Capacity | 0.8kj/Kg.K |
11 | Highest Temperature For application | 350°C |
Advantages:
* Utilizing Cast Basalt enhances and improves operational life of
plants.
* These are best suited for jobs where extensive cutting is needed.
* We can also deliver pre-cut tailored tiles based on the
considerations of vibration, impact and other factors at client’s
end.