Guangdong Yuchi Technology Co., Ltd. |
|
Protection Filter FFP2 Dust Mask / Like 8810 Dust Mask Face Shield Without Valve
Descriptions
Cup Mask use adjustable aluminum nose clip so it makes wearing more
sealless leakage ,use latex-free elastic strap , soft nose liner so
it make softer and fit the face .And use easy-breathing valve then
it makes breathing more smooth .
Advantage:
1, soft material : Breath smoothly as a free man with the mask.
2, skin and environmentally friendly, no peculiar smell
3, Regular company, reliable source of mask
Face Mask Type | Protection Filter FFP2 Dust Mask / Like 8810 Dust Mask Face Shield Without Valve |
Material/Fabric | 1st ply: Non-woven Protective Surface 2nd ply: KN95 Melt-blown Filter Layer 3rd ply: Non-woven Fabric 4rd ply: Skin-friendly Non-woven Inner Layer |
Function | Used in food sectors, school, household, industry and multi-purpose |
Type | Disposable mask |
Application | Public Place |
Weight | 2.9-3.2g/pc |
Directions for use
The mask is for single use only.
The mask should not be removed from its packaging until its
required for use.
Use the respirator in accordance with applicable health and safety
regulations.
Fit the respirator and check leak-tightness before entering the
contaminated area.
Wear the respirator for the whole duration of exposure to
contaminants.It should not be used for more than 8 hours
continuously and should be discarded after use.
Transport and stockage of unused masks should be such that the
product is not stored in direct sunlight and in frost free
conditions,not in contact with solvents and cannot be damaged by
physical contact with hard surfaces/items.
As required by European Health and Safety requirements,the user is
advised that when the mask is in contact with the wearer’s skin,it
may cause allergic reaction to susceptible individuals.If this is
the case,leave the hazard area,remove the mask and seek doctor’s
advice.