Results for3 inch cop34 shankfrom 817 Products.
|
High Air Pressure DTH Button Bits , 4 Inch Downhole Drilling Tools DTH Button Bits Features: 1. Strict quality controlling 2. Selected high quality special steels and carbide 3. ...
|
|
|
|
COP34 DHD 340 atlas ground dth button rock stone drill bit Roschen DTH hammers are available in sizes from 2" to 20" for Down The Hole hammer bits are available in sizes from 2" to ...
|
|
|
|
Tricone bits 8 1/2 inch Insert Tungsten Carbide Bearing Friction Sealing Tricone bits 8 1/2 inch Insert Tungsten Carbide Bearing Friction Sealing with API Reg Shank for Hardness ...
|
|
|
|
Solid augers 3 inch with hex shank pin and hex socket box down hard surface coating for auger drilling Solid Augers Solid augers have a hex shank (pin) up and a hex socket (box) ...
|
|
|
|
6 inch dth hammer shank DHD360 SD6 GL60 Hammers DTH Hammers Down The Hole (DTH) hammers provide the most versatile and cost effective rock drilling method available to date. ...
|
|
|
|
6 inch DTH hammer with DHD QL SD COP shank for mining and water well drilling Product Application ROSCHEN down the hole(DTH) hammers have proven superior performance and adaptabili...
|
|
|
|
Qualified 6 inch DTH hammer with QL60 DHD360 SD6 COP64 shank Product Application ROSCHEN down the hole(DTH)hammers have proven superior performance and adaptability to different ...
|
|
|
|
DTH Bits 4 inch Used for DHD340 Down Hole Hammer Down The Hole Drilling Features: 1. Strict quality controlling 2. Selected high quality special steels and carbide 3. Produced by ...
|
|
|
|
RH460 hammers 4 inch Down The Hole Hammer for Golden Mining Drilling DTH hammers RH460 hammers The complete RH460 family will consist of 4 standard size hammers ranging from 4" – 8...
|
|
|
|
Reverse Circulation Drill Pipe 4 Inch Remet, Metzke Tapered thread drill rods for RC Drilling Reverse Circulation Backhole 4 Inch Tapered Drill Rod Remet, Metzke thread RC Drill ...
|
|
|
|
Tricone drill bit 8 1/2 inch IADC code 437 for Very Hard Rock Formation Drilling THREE CONE ROCK BIT 4-1/2" IADC Code 647 THREE CONE ROCK BIT 4-1/2" IADC Code 647 for Granite ...
|
|
|
|
IADC 437 Tungsten Carbide Tricone Drill bits 8 1/2 inch for Medium Hardness Rock Formation Drilling Tricone bit, insert design, design of the bearing friction sealing protected OD, ...
|
|
|
|
DTH Bit DHD340A 152mm , DTH hammer Bit 6 1/2 inch concave, convex for Rock Blast hole Mining drilling Basic Information: 1. Model NO.: COP44, DHD340-115mm 2. Trademark: ROSCHEN 3. ...
|
|
|
|
Reverse Circulation Drill Pipe 4 Inch With Remet Thread For Gold Sampling Drilling Tapered Drill Rod Feature Integral drill rod, another name called integral drill steels, ...
|
|
|
|
Hard Rocking Mining 4 1/2 Inch Carbide Drill Rod Carbide Drill Rod Introduction drill rod, another name called integral drill steels, integral rods are used by hand held rock drill ...
|
|
|
|
Dual Wall Double Tube Drill Pipe Remet Thread 4 1/2 Inch For Reverse Circulation RE542 RE543 RC Hammer Drilling To save your time, Please Inform following info: a) Drill Rod size; ...
|
|
|
|
High/Low Air Pressure Water well Deep Hole Rotary Pneumatic Drilling DTH hammer Button Bits for COP MISSION DHD QL SD Matched products: 89mm drill rods with API 3 1/2" REG PIN 89mm ...
|
|
|
|
Underground Mining 15’ Heavy Weight Drill Pipe Heavy Weight Drill Pipe Introduction Heavy Weight Drill Pipe are a fixed length with a shank at one end and a bit at the other ,and ...
|
|
|
|
COP 44 button bits High Quality DTH hammers and button bits DHD340A,COP44 for Down The Hole Drilling ROSCHEN DTH Bits Specifications Hammer Size Bits diameter Shank ROSCHEN CODE ...
|
|
|
|
DTH Button Bits Mission 40 140mm Down The Hole In Australia Mining For Well Drilling DTH Button Bits Diameter: 57mm-660mm Application: Well drilling, Ore ming, Coal mining Shank of ...
|
|
|
You may also be interested in :